tag:blogger.com,1999:blog-17656357538398861962024-02-26T09:33:44.450-08:00Sense and DualityBing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comBlogger453125tag:blogger.com,1999:blog-1765635753839886196.post-6763205250179300602023-10-31T18:43:00.002-07:002023-10-31T18:43:29.823-07:00唱臂奇特/複雜就是好?<p> <span style="color: #333333; font-family: 新細明體; font-size: 12pt;">近年也出現一些,不按牌理出牌,或構造複雜到不可思議的唱臂。像是沒有補償角的超長或超短臂,還有眾多以各種奇特的機構來達到正切循軌的臂。</span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">沒有補償角的唱臂,主要訴求是不用抗滑機構。但事實上,與之搭配的唱頭針桿,並不會是完美平行於臂身且正對著唱臂軸心點。只要稍稍有偏離,向內或向外的側向力還是會產生,與直線正切臂的情況類似。這個問題,我也實際地在自己擁有的直線超短臂驗證過。因此這類唱臂,應該還是需要提供抗滑設施,唱頭的工作才能處於最佳狀態。而沒有補償角,幾何上的循軌角度誤差必然會較高,播放時二次諧波失真較多,因此會給人聲音厚實溫暖的感覺,但是整體透明度會受限制。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">至於在支點臂要達到正切循軌的目標,無可避免,必然會使用到多個軸承,且搭配複雜的機械結構。各個軸承的精密度與滑潤程度,都要在理想狀態,否則唱臂由內而外運動時,將會阻礙到唱頭的運作。而在高溫潮濕落塵量高的環境,這麼多個暴露在外的軸承,只要其中一個的工作性質開始有變化,就會產生阻礙。在我檢查測試過的眾多唱頭之中,大部分針尖一側磨損,或者線圈被拉歪的情況,都是安裝在正切臂。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-67687028898990976842023-10-31T18:42:00.001-07:002023-10-31T18:42:21.093-07:00近年來黑膠唱臂之趨勢<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">近年來黑膠復興,除了經歷過低迷時期的一些老廠牌之外,從事黑膠器材製作銷售的新廠牌也不斷冒出來。另外由於金屬</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">/<span lang="ZH-TW">機械的精密加工日漸普及化,每隔一段時間,新奇外觀的唱臂也會在市面上出現。在</span>1980<span lang="ZH-TW">年代之前的黑膠全盛時期,黑膠是聆聽音樂的最普遍手段,其它媒體的選擇不多。而當前各種數位媒體垂手可得,會進入黑膠領域並購買黑膠器材者,分析起來多數並不完全是為了聽音樂,有很大部分動機是出自於「好玩」與「擁有」的心態。</span> <span lang="ZH-TW">因此價格高,材質</span>/<span lang="ZH-TW">外觀越是與眾不同,或工作方式特別新奇有趣的器材,即使對播放音質的正面效益不大,甚至有負面效應,還是會有不少的追隨膜拜者。尤其是黑膠唱臂,以超高價格,或嘩眾取寵方式來博取關注及消費者青睞的產品,比比皆是。有紮實理論基礎,加工精密的產品,卻反而常被冷落。</span></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-2088969747754743202023-10-24T19:10:00.001-07:002023-10-24T19:10:15.149-07:00唱臂長/重就是好?<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">以前的年代,</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">12<span lang="ZH-TW">吋唱臂並不多見。近年來的趨勢,唱臂的長度長,質量重,似乎已經成為高價品的必備條件。除了</span>12<span lang="ZH-TW">吋臂幾乎每個廠牌都要有之外,還不時出現更長的機型。去問用家為何要購買價錢高出甚多的加長版本,多數的回答是「循軌誤差較小」,「所需抗滑力較小」。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">然而從學理上去分析計算,以同樣切線(例如</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Loefgren A DIN<span lang="ZH-TW">)安裝調整唱頭至完美的狀態,</span>12<span lang="ZH-TW">吋臂比起</span>9<span lang="ZH-TW">吋臂的最大循軌誤差,只有很小的一點點好處。況且一般人以視覺方式安裝調整唱頭循軌角,即使用了最好的工具,唱頭的安裝也無法完美,而且誤差的角度都會超出長短臂之間的差異。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">至於長臂所需的抗滑較小,更是認知上的謬誤。許多人以為唱頭安裝處的補償角(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">offset angle<span lang="ZH-TW">)在長臂上較小,就會引發較小的向內側向力。而事實上,向內側向力的來源,是針尖與溝槽之間的摩擦力方向,也就是唱頭針桿的延長線,與唱臂軸心之間的直線距離形成力矩。而這個直線距離,不會因補償角的大小改變。所以同樣的唱頭,裝在同型唱臂的長或短版本,播放時所產生的向內側向力是相同的。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">而較長臂連帶造成的是質量較高,同樣的唱頭與之搭配,必然會得到較低的低頻自然共振點。這對阻尼硬的唱頭是好事,但是阻尼較軟者就會有共振點過低的問題,音質暫態顯得偏遲鈍,低頻似乎更突出。現今市面上許多長臂的質量都超高,主要為的是顯得有份量而值得其高價位,幾乎所有唱頭裝上去都會有共振點過低的現象。而一般消費者對這都沒有概念,反正唱臂較長,看起來滿足。而且付出較多的金錢,得到的音質不同,心理上就認定必然是好的方向。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-65476501509153387392023-09-27T17:47:00.001-07:002023-09-27T17:47:07.352-07:00Stromtank S 2500 Quantum II<p> <span style="color: #333333; font-family: 新細明體; font-size: 12pt;">Stromtank S 2500 Quantum 2 is a computer-controlled battery-based
AC power source from Germany, equipped with the latest 48V battery and inverter
technologies. Substituting the isolation-transformer and PS Audio Power Plant
combo in my listening room as the AC source, the S2500Q2 transforms the sonic characteristics
of the system in a very fundamental way. The mid-range and low-frequency
presentation becomes much more full bodied, yet with tuneful, extended and well
controlled bass response. Another impressive improvement is in the expressiveness,
degree of realism and extended palate of tonal colors/shadings in vocals and
instruments, enabling greater enjoyment of every music genre. Additionally, the
background in the soundscape further darkens, allowing previously hidden
ambient and spatial information details to stand out. With the unit in place, I
also notice much easier differentiation among various recording/mixing
techniques in the source material, and any audio equipment powered by it seems
to demonstrate more of its true potential. Very pricey yet strongly
recommended.</span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-44639344687996971202023-09-27T17:44:00.003-07:002023-09-27T17:44:26.972-07:00DS Audio DS 003<p> <span style="font-family: Calibri, "sans-serif";">The DS 003 incorporates the latest generation of optical transducer technology
from the Japanese company DS Audio, and in lab tests has been proved to be
built with the highest quality standard. In listening sessions, record after
record not only does it further glorify the family traits of background quietness,
transient vividness, detail resolution and tonal neutrality, but also have surpassed
most conventional cartridges in freedom from mechanical graininess or
electronic glare/haze. It is also a definite champion in imaging accuracy/stability
throughout the entire audible range. More importantly, the DS 003 has such low level
of measurable and perceivable distortion, the illusion of an open-reel master
tape being played, or even a live event taking place in the room occurs much
more often than any competitor in the similar price range. I am tempted to
conclude that, this generation of optical cartridges is now capable of impressing
listeners not only with abundant musical information, but also with certain amount
of magical and seductive power. Strongly recommended.</span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-6487308068973676532023-09-27T17:40:00.001-07:002023-09-27T17:40:20.240-07:00Audio─Technica AT-ART20<p> <span style="font-family: Calibri, "sans-serif";">AT-ART20 is the latest top-end MC cartridge in production by
Audio-Technica. Its relatively high compliance rating requires a tonearm with
low effective mass to draw out best performance, otherwise the overall character
may lack vividness. In proper working conditions, its uncanny ability to effortlessly
depict refined yet realistic texture and harmonics of acoustical instruments,
especially strings and keyboards, along with human voices is unsurpassed by
competitions at any price point. Bass extension, control and pitch definition
is also top notch. Unlike high-end offerings from other brands, ART20 does not impress
listeners with in-your-face slams, but with a sonic picture nearly free of any
electronic glare or graininess. On the down side, channel separation is
measured at a mediocre ~23dB. As such image precision and stage width are not
among its strengths.</span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-49546357290677777832023-06-30T18:36:00.001-07:002023-06-30T18:36:33.996-07:00基本概念:黑膠播放發聲原理及唱頭基本構造<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">黑膠唱片上的訊號在溝槽的兩側,要經過讀取,等化,放大的過程,最後才由喇叭</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">/<span lang="ZH-TW">耳機發聲。讀取的方式,主要是由唱頭的針尖與溝槽接觸,藉由唱盤轉盤的轉動,使兩者產生相對運動而使針尖振動。極少數例外的情況是用雷射光束,與溝槽無實質接觸。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">黑膠唱頭針尖之運動,目的在於遵循溝槽的起伏,來重現當初刻片刀的軌跡。兩者軌跡越接近,失真就越小,傳真度越高。這是反向回溯刻片過程之能量轉換過程,將機械動能轉為電能訊號,再傳遞至下游的唱頭放大器,前後級擴大機等。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">機械動能的來源是唱盤,它提供唱頭發電的能量。因為唱頭是被動元件,在唱盤不轉動的靜止狀態時,由於沒有外來能量來源,本身無法發出訊號。唱盤之轉動,提供恆定之能量,使針尖遵循溝槽訊號振動,帶動針桿及發電機構。以能量供應模式來看,唱盤角色類似於後級擴大機。它要提供穩定能量,再讓訊號加諸其上(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">modulate<span lang="ZH-TW">),傳送至下游器材。因此能量之純淨度,會直接影響訊號品質。首先轉盤的轉速要準確,播放出的訊號頻率才能與原始刻片時相同。而且轉速要穩定,顫抖率(</span>flutter<span lang="ZH-TW">)與飄移率(</span>wow)<span lang="ZH-TW">都要越低越好。唱盤的避震,除震也甚為重要,否則外來震動雜訊會傳遞至播放中的唱片表面,被唱頭唱針拾取而進入訊號中,再傳遞至下游器材。另外還要考慮的是,基於能量不滅定律,唱頭與溝槽接觸摩擦的發電過程,會造成能量損耗,唱盤的轉盤必須補充並維持能量,才能保持轉速平穩。這也是不同驅動方式與扭力高低的唱盤,會造成音質不同的原因之一。而唱盤各種驅動方式各有其先天的優點缺點,以後會再作分析。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">唱頭發電,將動能能量轉換為電能的方式,主要有以下幾種。第一大類為傳統電磁方式,運用法拉第定律,線圈與磁鐵相互運動,切割磁力線發電,發電量與針尖移動速率成正比。相互運動的方式又可概略分為:</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpFirst" style="mso-list: l1 level1 lfo1; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">動圈(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">MC<span lang="ZH-TW">:</span>Moving
Coil<span lang="ZH-TW">):線圈(內部可能還包著鐵芯來加強磁力)固定於針桿後端,播放時兩者連帶一起運動,切割過磁鐵的南北磁極之間形成的磁力線,線圈就會感應出電流。線圈質量必須要很輕,才不會妨礙針桿動,因此線圈繞線數少,故而</span>MC<span lang="ZH-TW">唱頭的輸出一般都相當低。</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpMiddle" style="mso-list: l1 level1 lfo1; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">動磁(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">MM<span lang="ZH-TW">:</span>Moving
Magnet<span lang="ZH-TW">):針桿後端有磁鐵附著,磁鐵與針桿運動時,周遭有幾個線圈會感應出電流。</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpLast" style="mso-list: l1 level1 lfo1; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">動鐵(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">MI<span lang="ZH-TW">:</span>Moving
Iron<span lang="ZH-TW">):與</span>MM<span lang="ZH-TW">類似,只是針桿後端附著的是本身不帶磁的鐵質,去感應附近的磁鐵而產生磁力作用。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">第二大類為較不常見的非電磁方式:</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpFirst" style="mso-list: l0 level1 lfo2; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">光電(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Optical<span lang="ZH-TW">):以發光</span>LED<span lang="ZH-TW">照射類似太陽能發電的感光元件,針桿運動時藉由固定在針桿上的遮光板,改變投射在感光元件上的光量,進而產生高低不同的發電量產生電能訊號。與一般電磁發電的主要不同處,在於發電量與針尖位移成正比,而非移動速率。因此在放大與等化訊號時,要以不同方式處理。</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpLast" style="mso-list: l0 level1 lfo2; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">壓電(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Piezoelectric<span lang="ZH-TW">),陶瓷(</span>Ceramic<span lang="ZH-TW">)等不常見方式,限於篇幅在此不討論,有興趣瞭解者可以上網搜尋資料。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">另外還有像是日本</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">ELP<span lang="ZH-TW">廠以純光學雷射讀取,與唱片溝槽無針尖接觸。由於使用者更稀少,在此也不作討論。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">下圖</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW">是一個</span>MC<span lang="ZH-TW">唱頭,除了一般容易看見的針尖針桿之外,唱頭內部構造的主要組成部分。磁鐵(</span>magnet<span lang="ZH-TW">)的前後有磁極(</span>poles<span lang="ZH-TW">)將磁力延伸至線圈的前後方,於兩個磁極之間形成磁場,線圈(</span>coil<span lang="ZH-TW">)運動時會切割磁力線而在線圈內發電。阻尼(</span>damper<span lang="ZH-TW">)之功能,在於抑制多餘震動,並且形成槓桿支點,支撐針桿及線圈之運動。阻尼的彈性及軟硬性質,對唱頭運作及其音質有直接且深遠影響,例如循軌能力,播放針壓,順服度,低頻共振頻率,高頻共振頻率,等等。阻尼的材質,多數以橡膠為主要成分,混入其它材質以調節彈性,制動性與剛性軟硬程度等。各唱頭廠牌所用的阻尼都有其獨特的配方,也會形成該廠唱頭的音質個性。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">另外在唱頭內部針桿最後端,從圖裡看不見的一個重要組件是懸吊(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">suspension<span lang="ZH-TW">)。多數是一細小的鋼絲,其主要之功能在於固定</span>/<span lang="ZH-TW">保持針桿角度,並維持線圈與阻尼的相對位置與壓力,且對唱頭音質有微調的效果。有時看到一些唱頭的針桿歪斜或角度太陡</span>/<span lang="ZH-TW">太低,主要就是懸吊鋼絲的張力太緊或太鬆,所導致的後果。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">唱頭的各個零組件,製造過程都會有誤差。而將零組件組裝,多數還是由手工達成,使得產生誤差的可能性更多:</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpFirst" style="mso-list: l2 level1 lfo3; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">針尖研磨誤差:目前世界上各廠牌的唱頭針尖,都由少數幾家</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">OEM<span lang="ZH-TW">廠供應。針尖幾乎是鑽石材質,較低價的由鑽石粉末製成,較高價者由整個鑽石去切削,最後都再研磨成各種形狀的針尖。而加工研磨時,必然會有某種程度的誤差,且每個樣本的誤差程度會有些許不同。</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpMiddle" style="mso-list: l2 level1 lfo3; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">針尖安裝角度誤差:</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">OEM<span lang="ZH-TW">會根據唱頭廠的要求,將所指定的針尖種類裝在指定的針桿材質。針桿的材質選擇很廣泛,包括有鋁,硼,碳纖維,鑽石等。針尖安裝在針桿上,也會有一些誤差。有三個可能旋轉軸向,分別會影響到</span>azimuth<span style="mso-spacerun: yes;"> </span><span lang="ZH-TW">,</span>VTA/SRA<span lang="ZH-TW">,與</span> zenith<span lang="ZH-TW">角度。這些會在後續講到唱頭設定的各種參數時,再進一步討論</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpMiddle" style="mso-list: l2 level1 lfo3; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">針桿安裝角度誤差:唱頭製造廠將</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">OEM<span lang="ZH-TW">提供的針尖</span>/<span lang="ZH-TW">針桿組合,安裝至唱頭的發電機構時,多數還是由人工在顯微鏡下操作完成,因此產生誤差的機率相當高。誤差也是有三個可能旋轉軸向,影響到上述的三個角度,爾後會詳細討論。</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpMiddle" style="mso-list: l2 level1 lfo3; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">發電機構:各組件包括線圈繞製,磁鐵的製作</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">安裝角度,以及各組件的相對位置等,都會有誤差。</span><o:p></o:p></span></p>
<p class="MsoListParagraphCxSpLast" style="mso-list: l2 level1 lfo3; text-indent: -.25in;"><!--[if !supportLists]--><span style="color: #333333; font-family: Symbol; font-size: 12.0pt; line-height: 115%; mso-bidi-font-family: Symbol; mso-fareast-font-family: Symbol;"><span style="mso-list: Ignore;">·<span style="font: 7.0pt "Times New Roman";"> </span></span></span><!--[endif]--><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">唱頭外殼:頂部安裝面的平整度,安裝螺絲孔位置等,也會有誤差。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">因此,在安裝唱頭時必須藉各種工具觀察</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">測量,在得知有誤差時採取補償措施,之後會有深入的討論。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">唱頭還需要安裝於唱臂,才能運作。唱臂所扮演的的角色,是提供讓唱頭得以穩定運作之平台。要注意的一個要點是,唱頭在唱片表面由外至內的移動,其動力來源與刻片頭不同。刻片頭往內的移動是由刻片機所控制,讓溝槽成為逐漸往內的螺旋。而唱頭受溝槽牽引,是被動的受牽引而逐漸往內。這就對唱臂形成了兩種互相矛盾之需求,一方面唱頭針尖</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">針桿及發電機構在動作時,唱臂必須穩定,避免隨之運動而失去溝槽的訊號內容。另一方面,唱片溝槽帶動唱臂往內漸漸移動的過程,會因中心孔偏移內外擺動,或者唱片表面不平而上下移動,這時又必須靈活對應。因此唱臂的質量不能太小,也不能太大。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">唱臂與唱頭搭配,要考慮的因素之一就是兩者加起來的質量與唱頭的順服度(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">compliance<span lang="ZH-TW">)。一般而言,唱頭順服度低,阻尼硬者,多數需搭配較高質量的唱臂。從直觀角度來看,唱頭阻尼硬的話,唱臂如果太輕,就容易被針桿的運動所帶動。而唱頭順服度高,阻尼軟者,多數需搭配質量較低的臂,唱頭要左右或上下隨唱片溝槽移動時才不會被重質量的臂「拖住」。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">從物理</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">機械學理來看,唱頭與唱臂合起來是一個彈簧</span>/<span lang="ZH-TW">重錘</span>/<span lang="ZH-TW">阻尼系統,本身會有一個自然共振頻率,或稱低頻共振點。這個共振點的頻率高低,主要是由兩者合起來的質量與唱頭本身順服度所決定。這個頻率要控制於</span>8<span lang="ZH-TW">至</span>12Hz<span lang="ZH-TW">之間,以</span>10Hz<span lang="ZH-TW">最理想。共振點太低,例如將阻尼軟的唱頭裝在質量高的唱臂時,就會接近唱片不平或偏心的頻率,可能引發共振而抖動甚至跳針。而且一般而言,還會造成一些高頻音質方面的問題。而將阻尼硬的唱頭裝在輕質量的唱臂,則共振點會太高,接近音樂裡的極低頻訊號,而形成的共振會使低頻顯得肥大渾濁。因此將唱頭安裝於一支唱臂上之前,要先作這方面的考量。至於如何去計算或測量一個唱頭唱臂組合的低頻共振頻率,之後會有詳細的說明。</span><o:p></o:p></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEggCnKlq6qTQmVasGj2nUE1KcGv0Z4-mEmvEw1CXHiU_23NgdUgnHY-IllC_j-TF55z1F5dUB6FXdyfBjVRNtZ3P1_NBtRLm76MNO7927O9likQ6_sVpB54LfYLt7zvbtGWogkO-viXCbzjI4tJpEeMbuMqARMzLYSG3Ks8mV_P0IclCSCmLaJzN6lKTrc/s640/fig9.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEggCnKlq6qTQmVasGj2nUE1KcGv0Z4-mEmvEw1CXHiU_23NgdUgnHY-IllC_j-TF55z1F5dUB6FXdyfBjVRNtZ3P1_NBtRLm76MNO7927O9likQ6_sVpB54LfYLt7zvbtGWogkO-viXCbzjI4tJpEeMbuMqARMzLYSG3Ks8mV_P0IclCSCmLaJzN6lKTrc/w640-h480/fig9.jpg" width="640" /></a></div><br /><p class="MsoNormal"><br /></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-44579995642692963332023-06-30T18:26:00.007-07:002023-07-25T20:19:00.046-07:00基本概念:黑膠唱片如何產生<p> <span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%;">黑膠唱片上的訊號內容,可能來自於類比盤式母帶播放提供給刻片機,也可來自數位音源或檔案等由播放器轉成類比訊號給刻片機。少數的直刻片(</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%;">direct-to-disc<span lang="ZH-TW">)則不經中間媒體,在麥克風收音混音後直接進入刻片程序。</span></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">刻片機上安裝的刻片頭,如圖</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">1<span lang="ZH-TW">(感謝白金錄音室葉垂青先生提供照片)裡是一個倒置的樣本,是負責刻片的關鍵部分。它的運作是一個能量轉換的過程,運用法拉第定律,將訊號電能藉電磁作用轉為機械動能,大多數在漆盤(</span>lacquer
master<span lang="ZH-TW">或稱蠟盤)或較少數場合直接在金屬盤(</span>direct metal master<span lang="ZH-TW">簡稱</span>DMM<span lang="ZH-TW">)上刻入溝槽(</span>grooves<span lang="ZH-TW">),而且溝槽裡會加上擬似(</span>analog
to<span lang="ZH-TW">)原始訊號的波型───這是黑膠被稱為「類比」媒體的主要原因。刻片機由刻片師操作,決定溝槽深淺及間隔。所刻出的溝槽經過各種加工程序成為金屬壓模(</span>metal
stamper<span lang="ZH-TW">),最後在加熱軟化的膠質原料上壓製形成黑膠唱片。所得到唱片成品的溝槽,會與刻片時的溝槽非常近似。由於種種的考量,訊號進入刻片程序之前,大多會先經過等化的程序,例如</span>RIAA<span lang="ZH-TW">等化,以後會有較詳細的討論。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">黑膠唱片上,剖面為</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">90<span lang="ZH-TW">度</span>V<span lang="ZH-TW">形的溝槽,</span>V<span lang="ZH-TW">字兩側可以帶有相同或者不同的訊號。兩側訊號一樣的話是單聲(</span>mono<span lang="ZH-TW">),不同的話就是立體聲(</span>stereo<span lang="ZH-TW">)。立體聲溝槽的內側(靠唱片中心)是左聲道訊號,外側是右聲道。圖</span>2<span lang="ZH-TW">是從上方以顯微鏡觀察左聲道正弦波(</span>sine
wave<span lang="ZH-TW">)訊號的溝槽,兩條藍色斜線之間是一道溝槽。可以看到,內側的溝槽是正弦波的波浪狀起伏,外側則是平直的。圖</span>3<span lang="ZH-TW">是右聲道的正弦波訊號溝槽,外側有正弦波的起伏,內側平直。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">圖</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">4<span lang="ZH-TW">裡是唱頭在播放這兩種溝槽時,針尖會運動的方式。播放只有左聲道有訊號的溝槽時,針尖會以藍色箭頭的軌跡方向來回運動。只有右聲道有訊號時,以紅色箭頭來回運動。這些與原來刻片頭的刻片刀,在刻入訊號時的運動軌跡一致。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">圖</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">5<span lang="ZH-TW">是以顯微鏡觀察</span>mono<span lang="ZH-TW">正弦波的溝槽,內外側正弦波的起伏週期是一起的,紫色斜線之間是一道溝槽。圖</span>6<span lang="ZH-TW">是唱頭在播放這兩種溝槽時,針尖運動的軌跡,顯示只有橫向的內外運動,沒有垂直向的上下動作。圖</span>7<span lang="ZH-TW">與</span>8<span lang="ZH-TW">同樣是</span>mono<span lang="ZH-TW">正弦波的溝槽,但訊號強度逐漸增加。播放時,唱頭針尖內外擺動的幅度也會加大。播放立體聲(</span>stereo<span lang="ZH-TW">)訊號的溝槽時,針尖則會合併橫向與垂直向的動作,運動軌跡會變得複雜許多。</span><o:p></o:p></span></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjqh1VhqhC6hvKJktcGDON2svw_dAYwS9GNoKmhuXUq3cR4ZoMqFIj2qTyTaxEB7c1dbfzIWc6OiMJDFTrq3Xm8Op2FZJr-X6OPT8coa7YcF9scrj5Me7iy0yKQOuEBS2kHyhJO_ctXm6oFkYAG39y_xCxWuTKxIX0cGugv74ZA_gIhiLrnuhsmC6H0nLg/s875/fig1.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="657" data-original-width="875" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjqh1VhqhC6hvKJktcGDON2svw_dAYwS9GNoKmhuXUq3cR4ZoMqFIj2qTyTaxEB7c1dbfzIWc6OiMJDFTrq3Xm8Op2FZJr-X6OPT8coa7YcF9scrj5Me7iy0yKQOuEBS2kHyhJO_ctXm6oFkYAG39y_xCxWuTKxIX0cGugv74ZA_gIhiLrnuhsmC6H0nLg/w640-h480/fig1.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖1</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjzLt60tnJ48H-olgt1BM2dig904rrkR6vPzHvYITT2h4AveOJVP69piZyo3WXZNEUflRMzXwT-bx3AXuicBocJ6QAaUhO2jaXrMe97zDuI0HF1mv66xRLSmK6jzIN1kq25Rv0f1_Y0jUIHHu8G19FvwLwbgGfsrpprKpucUwEzVmAJ1RARcVtVRe4htPk/s640/fig2.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjzLt60tnJ48H-olgt1BM2dig904rrkR6vPzHvYITT2h4AveOJVP69piZyo3WXZNEUflRMzXwT-bx3AXuicBocJ6QAaUhO2jaXrMe97zDuI0HF1mv66xRLSmK6jzIN1kq25Rv0f1_Y0jUIHHu8G19FvwLwbgGfsrpprKpucUwEzVmAJ1RARcVtVRe4htPk/w400-h300/fig2.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;">圖2</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg4NCxeL-OMxy36yfHVsczNRQafS6Oo4Yx-245KCvUullRoIPoo1mgDA4KRWTxLqfUxgWB9_A9X_E9-_SYl6GopYFPAcfbqUcuemq3WHLcZwqt6ARl3eXxogANRVNE25nO5fW96r16K4XqgVG1k4tl-VMEY7uB0Lfgj2zdogQUj6trgGmwdP4eX6Ne2qUQ/s640/fig3.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg4NCxeL-OMxy36yfHVsczNRQafS6Oo4Yx-245KCvUullRoIPoo1mgDA4KRWTxLqfUxgWB9_A9X_E9-_SYl6GopYFPAcfbqUcuemq3WHLcZwqt6ARl3eXxogANRVNE25nO5fW96r16K4XqgVG1k4tl-VMEY7uB0Lfgj2zdogQUj6trgGmwdP4eX6Ne2qUQ/w400-h300/fig3.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;">圖3</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjSV5udT1Lb-9QwflzHeYwrLb7mY2jVJAOa1DFSWX-b8YYIl3VYGbgUPbNaNxzn5_Kr6wywEAa1zCZ0YR-vPKZ6uCmDIiIf54u3DZzh2TCf8wRuX7GaDrxcmz_R7VRUB59ljGcHRdgU_q2Ssasj98ijvVHdPPuUejMtoWEpQXTKAnNOVJAMSMegBVHLTYM/s640/fig4.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjSV5udT1Lb-9QwflzHeYwrLb7mY2jVJAOa1DFSWX-b8YYIl3VYGbgUPbNaNxzn5_Kr6wywEAa1zCZ0YR-vPKZ6uCmDIiIf54u3DZzh2TCf8wRuX7GaDrxcmz_R7VRUB59ljGcHRdgU_q2Ssasj98ijvVHdPPuUejMtoWEpQXTKAnNOVJAMSMegBVHLTYM/w400-h300/fig4.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;"><span style="font-size: 12pt;">圖4</span></div><div class="separator" style="clear: both; text-align: center;"><span style="font-size: 12pt;"><br /></span></div><div class="separator" style="clear: both; text-align: center;"><br /></div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiYmMVH9kbILd-65Yt4NeRzbGSr62r8vCZ30DoYj4D6Lo0y0huWX8QzGXcpWz7N2uWoHnSttI62ewNoeVvaWalwoEbMgykYcFSobt5uUN0e6NticSrbk3Yp4zMjfMeiEAOVMLbjMhg7xJXq4kkQwQgW8Pzd0o5LJIHs5ik1FYLw9uY7IkE6h7kg-k8qt7Q/s640/fig5.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiYmMVH9kbILd-65Yt4NeRzbGSr62r8vCZ30DoYj4D6Lo0y0huWX8QzGXcpWz7N2uWoHnSttI62ewNoeVvaWalwoEbMgykYcFSobt5uUN0e6NticSrbk3Yp4zMjfMeiEAOVMLbjMhg7xJXq4kkQwQgW8Pzd0o5LJIHs5ik1FYLw9uY7IkE6h7kg-k8qt7Q/w400-h300/fig5.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;">圖5</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjs7KairN6tk4EjAt7mfsUFjlvW5AOuNafQREFhgFwfCO_63xdVxvxJPLGwMOOK15pyaNmmAQhKBX2GxQGiGLxCHrETQWryIIiTKGEgty_SQc0mjeEvQe4LT6e1VpsCWNll50fcR1DS5FM55nG_B0obClqDj7mRNKXlYIKdjLmCu-7gIpzi4TdNXVVOn70/s640/fig6.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjs7KairN6tk4EjAt7mfsUFjlvW5AOuNafQREFhgFwfCO_63xdVxvxJPLGwMOOK15pyaNmmAQhKBX2GxQGiGLxCHrETQWryIIiTKGEgty_SQc0mjeEvQe4LT6e1VpsCWNll50fcR1DS5FM55nG_B0obClqDj7mRNKXlYIKdjLmCu-7gIpzi4TdNXVVOn70/w400-h300/fig6.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;">圖6</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhVh9lKW7RofdH8Iza4xUwDQ9qPfUpAYalE1xEeluC6ACf2wT4hVBnsEOXvPFWeHeK83EsVVYUKI_MbylkS0n27qtKYSuSK_FJYPHw7scc6ezav7vCerONvaDzO8Itf3dLH-ce-inKxNfgkmQ8pDPS6-XFuYSgnpYQmzZx7mMwNQWVN-qfZC9BNQ9FSaZY/s640/fig7.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhVh9lKW7RofdH8Iza4xUwDQ9qPfUpAYalE1xEeluC6ACf2wT4hVBnsEOXvPFWeHeK83EsVVYUKI_MbylkS0n27qtKYSuSK_FJYPHw7scc6ezav7vCerONvaDzO8Itf3dLH-ce-inKxNfgkmQ8pDPS6-XFuYSgnpYQmzZx7mMwNQWVN-qfZC9BNQ9FSaZY/w400-h300/fig7.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;">圖7</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiQGDPHborGy6pBdk_r_jBxUVznY2nJL1QiUKCJYqzTWDgVW0NBRYBhtzc4wk0xXgYKzLLdQgK8V55IZ3FXZW06kHMIz2ruqoXmAiPG0qaftesUpOJoulv8r2LG2j6cCzBgM6-qXoouXqdYSL1WrAU3S4Cp0R3UUOOXouu3RyM66mJK_KY91cDk8eqqJQo/s640/fig8.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="300" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiQGDPHborGy6pBdk_r_jBxUVznY2nJL1QiUKCJYqzTWDgVW0NBRYBhtzc4wk0xXgYKzLLdQgK8V55IZ3FXZW06kHMIz2ruqoXmAiPG0qaftesUpOJoulv8r2LG2j6cCzBgM6-qXoouXqdYSL1WrAU3S4Cp0R3UUOOXouu3RyM66mJK_KY91cDk8eqqJQo/w400-h300/fig8.jpg" width="400" /></a></div><div class="separator" style="clear: both; text-align: center;">圖8</div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><span lang="ZH-TW"><br /></span><p></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-43421815465705501132023-06-28T23:24:00.001-07:002023-06-28T23:24:49.774-07:00基本概念:針尖/針桿與唱片溝槽的相對關係<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">刻片機將訊號刻到母盤,經過各道工序最後製作成黑膠唱片。在唱片溝槽裡兩側的訊號,會呈現波浪狀內外擺動及</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">/<span lang="ZH-TW">或上下高低起伏。溝槽有兩側,分別是靠唱片中心的內側壁是左聲道,反方向靠外側壁是右聲道,兩者形成一條剖面是</span>V<span lang="ZH-TW">字形的峽谷。如果是</span>mono<span lang="ZH-TW">訊號,兩聲道的訊號是一樣的,溝槽就只有水平向的內外擺動。如果是立體聲訊號,就還會加上垂直方向的高低起伏。圖1</span><span lang="ZH-TW">是從唱片上方以顯微鏡觀察溝槽,訊號內容是最簡單的</span>mono<span lang="ZH-TW">正弦波訊號。播放這</span>mono<span lang="ZH-TW">訊號時,唱頭針尖隨著波浪形狀內外擺動,帶動針桿及後端的發電機構,產生訊號傳遞至下游器材放大,推動喇叭或耳機而發聲。如果用示波器觀察上述溝槽的訊號,就如圖2</span><span lang="ZH-TW">上半部的示波器顯示裡,左(綠色線)右(紅色線)聲道的波型,這與從上方看到的溝槽形狀接近一致。當訊號的頻率越高,擺動越快,溝槽裡的波峰波谷擺動之間距離就越狹窄。如果是</span>stereo<span lang="ZH-TW">立體聲訊號的溝槽,兩側溝槽壁就不再是一致內外擺動。針尖在播放時,除了內外方向的運動,還會加上垂直於唱片表面的上下起伏。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">唱頭的針尖用肉眼看起來很小,然而實際上還是比唱片溝槽要大很多。即使是最強訊號的溝槽,不論再寬再深,播放的時候,都只有針尖的最尖端一小部分,會進入溝槽裡面,其它大部分的體積都在外面。而實際與溝槽接觸摩擦處,更只有最尖端的一小部分。例如圖3</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW">裡的針尖,大約只有它整塊鑽石柱最尖端,佔整個高度不到</span>10<span lang="ZH-TW">分之一的部分,於播放時是真的在溝槽裡。因此針尖尖端的粗細程度,還有與溝槽接觸的截面形狀與大小,都會影響到針尖跟隨溝槽動作的能力。當針尖的尖端比溝槽的波動要來得粗大,或者截面大於波動的寬度,就會發生無法進入狹窄處的狀況,導致部份的訊號內容無法經由針尖感應出來。因此近年來的趨勢是將針尖盡量最小化,而且與溝槽接觸的截面更窄。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">特別是在訊號頻率高,而且又接近唱片內圈時,這種情況會更普遍。例如</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">20kHz<span lang="ZH-TW">的正弦波訊號,每秒振動</span>2<span lang="ZH-TW">萬次,而</span>33<span lang="ZH-TW">轉唱片轉一圈大約是</span>1.8<span lang="ZH-TW">秒。在黑膠最外圈的溝槽裡,計算起來其波長差不多在</span>20u<span lang="ZH-TW">(</span>1</span> <span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">u <span lang="ZH-TW">是</span>10<span lang="ZH-TW">的負</span>6<span lang="ZH-TW">次方公尺),而波型頂部或底部寬度在</span>10</span> <span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">u<span lang="ZH-TW">左右。但在最內圈溝槽,圓周長度少了一半,同樣的振動次數要在一半的距離內完成,因此波長變成</span>10
u<span lang="ZH-TW">左右,波型頂部只剩約</span>5u<span lang="ZH-TW">寬。以前早期的圓錐針尖,與溝槽接觸部分的圓形直徑大概在</span>10
u<span lang="ZH-TW">,可以想像要進入這種頻率的波型頂部會有困難,無法完整遵循波型移動。近代的針尖,接觸溝槽的截面多數比這小,約是</span>3u<span lang="ZH-TW">左右或更狹小一些,比較可以完整呈現波型。但是如果是比</span>20kHz<span lang="ZH-TW">更高頻的訊號,還是會有困難,失真的情形必然會增加。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">圖4</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW">,5</span><span lang="ZH-TW">是典型的圓錐(</span>cone<span lang="ZH-TW">)針尖顯微照片。圖6</span><span lang="ZH-TW">,7</span><span lang="ZH-TW">是橢圓(</span>elliptical<span lang="ZH-TW">)針尖。線形接觸(</span>line contact<span lang="ZH-TW">)針尖又可再細分為許多種類,圖8</span><span lang="ZH-TW">,9</span><span lang="ZH-TW">是其中兩種。不管針尖整體的形狀為何,最關鍵的是實際播放時,與溝槽接觸部位的截面大小與形狀。如果針尖形狀是圓錐,與溝槽接觸的截面會是圓形。橢圓針尖的接觸截面為橢圓形,線形接觸針尖的接觸截面則是很狹窄的長條狀。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">在圖</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">10<span lang="ZH-TW">裡各種黃色標記物,代表的是各種針尖的上方觀點剖面,與溝槽的相對關係。最上方的倒三角形,是刻片機上刻片刀的剖面。第二個圓形代表的是圓錐針尖的剖面,第三個是橢圓針尖,最下方第四個代表的是線型接觸針。而右側紅色標記物是各種針尖與溝槽接觸截面的形狀。圓錐針尖的場合是兩個圓形,橢圓針尖是比圓形狹窄的橢圓形,最下方的則是線型接觸針,更狹窄的兩個條狀。要特別指出的重點是,溝槽是像</span>V<span lang="ZH-TW">字形的峽谷,所以代表接觸截面的這些紅色標記,是在峽谷兩側的溝槽壁的斜坡上。在這些圖例裡,從側面觀察唱頭時,針尖是完全垂直於唱片的表面,所以每一對紅色標記都是互相對齊的。例如最下方的線型接觸針場合的兩個條狀,看起來是─與─。以後會討論到,唱頭若有前傾或後仰,一對紅色標記之間就會有角度,不再是對齊的相對關係。可能會變成比較近似</span>/<span lang="ZH-TW">與</span>\<span lang="ZH-TW">,或者</span>\<span lang="ZH-TW">與</span>/<span lang="ZH-TW">的樣子。以後在講</span>VTA<span lang="ZH-TW">與</span>SRA<span lang="ZH-TW">角度時,對這些觀念將有更詳細的說明。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">各種針尖形狀在加工製作時的難易程度不同,成本也會有差異。一般來說,形狀越接近對稱的,越容易以自動化的工具處理,成本就較低。例如圖4</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW">裡的圓錐針尖,從垂直方向來看是圓形</span>360<span lang="ZH-TW">度對稱,在所有針尖裡算是最容易加工的。圖6</span><span lang="ZH-TW">裡橢圓接觸面的針尖,一般是將圓錐針尖的前側與後側切</span>/<span lang="ZH-TW">磨去一部份,於是原本的圓形截面縮小,變成橢圓形。接觸截面更窄小的線形接觸針尖,則是將橢圓接觸面再加以研磨,使垂直方向變得更窄而銳利。至於可算是線形接觸針尖其中一種的</span>MR<span lang="ZH-TW">(</span>micro ridge<span lang="ZH-TW">)針尖,是將橢圓接觸面切削掉兩個角落,垂直方向成為一條脊狀。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">OEM<span lang="ZH-TW">供應廠根據唱頭廠家的要求,加工鑽石成所要的指定形狀,選定針桿的粗細與材質,組合並固定針尖與針桿。在三度空間裡,從三軸向來觀察,針尖與針桿會形成三個相對角度。由於針尖是嵌入針桿而且</span>/<span lang="ZH-TW">或者以膠質黏著,針尖相對於針桿的這三個角度是固定的,除非有不正常的鬆動,不會因為播放時受力而改變。而唱頭針尖相對於唱片表面,也會形成三個角度。這些角度數值,則是由安裝與調整唱頭所決定,而且角度的改變會直接影響到前面所說,針尖與溝槽接觸截面的角度及大小等,連帶也影響到播放音質。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">而在黑膠播放時,針桿相對於唱片表面,從上方,側面與前方觀察都各有一個角度數值。由於針桿後段是以彈性阻尼與懸吊固定,當受到垂直方向的力,像是針壓,就會上下改變一些角度。受到側向力,就會內外改變角度。至於朝前方向的力,像是播放唱片時來自針尖與溝槽摩擦的拉力,由於針桿前後並不能移動,正常情況下也會轉換成上下或內外的角度變化。朝後面方向的力,在正常播放情況不會發生,多數只有歌舞廳製作效果的</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">DJ<span lang="ZH-TW">,用手去反向轉動唱盤的轉盤時才出現。而且他們一定要使用給</span>DJ<span lang="ZH-TW">專用,特殊加強的針尖與針桿,否則一般唱頭很容易就因此損壞。</span><o:p></o:p></span></p><p class="MsoNormal"><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjcAMK4VLDXqkd99pBT-bHwZ7qKQwEjxV4fbYwxjZ23sbSOxmuzxm4Pcls671jJI4WNw1MQIGBZyF1HAkFEkzLmenRLujzP8xQw-iRHrANgWcIu-xgLgIgzumfmxNMAjSToBxR9nQ49Xz_BJLtAiiQoXtLAnvA-1Jsbn8OVs70be_35IKO9CKdWsRXg6bY/s640/figure6.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjcAMK4VLDXqkd99pBT-bHwZ7qKQwEjxV4fbYwxjZ23sbSOxmuzxm4Pcls671jJI4WNw1MQIGBZyF1HAkFEkzLmenRLujzP8xQw-iRHrANgWcIu-xgLgIgzumfmxNMAjSToBxR9nQ49Xz_BJLtAiiQoXtLAnvA-1Jsbn8OVs70be_35IKO9CKdWsRXg6bY/w640-h480/figure6.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖1</div><div class="separator" style="clear: both; text-align: center;"><br /></div><div class="separator" style="clear: both; text-align: center;"><br /></div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6tmbPIp_aSKnVkA7jRd_uGNqso6R25w6ryjldn-mJu3DgJXwfLViPMn1bOfNt1N2lypwoJPcN5_Zz5xSEOrX8avP1bLfGfxi2-zpmtxefEe1hu_iDumZerMajHew5WqsCG6zC4IHffWYt7tS-vuzzONZ0OmZf-_8p2fslFukvzLJRDVqWTtIOm5gHmg4/s905/figure7.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="581" data-original-width="905" height="410" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi6tmbPIp_aSKnVkA7jRd_uGNqso6R25w6ryjldn-mJu3DgJXwfLViPMn1bOfNt1N2lypwoJPcN5_Zz5xSEOrX8avP1bLfGfxi2-zpmtxefEe1hu_iDumZerMajHew5WqsCG6zC4IHffWYt7tS-vuzzONZ0OmZf-_8p2fslFukvzLJRDVqWTtIOm5gHmg4/w640-h410/figure7.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;"><span style="font-size: 12pt;">圖2</span></div><div class="separator" style="clear: both; text-align: center;"><span style="font-size: 12pt;"><br /></span></div><div class="separator" style="clear: both; text-align: center;"><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgDwRc8Mo0DO-16S3oBuEaRUOLOhiezwpJbSrC5cSjFoQhjy6cjLgBu-N1vz6nIqcEE5q26kyIWraTbV-4wtD1fFxgO-pcty0J1fiuaOnwnQ95RH_nymA5qW-RM2Y8yaQWVQycO_4EYHAnwx_LBsjC6mzQSdWjvmyVCw_CDy61Yi4_9XKAh14y44MeYLAo/s640/figure8.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgDwRc8Mo0DO-16S3oBuEaRUOLOhiezwpJbSrC5cSjFoQhjy6cjLgBu-N1vz6nIqcEE5q26kyIWraTbV-4wtD1fFxgO-pcty0J1fiuaOnwnQ95RH_nymA5qW-RM2Y8yaQWVQycO_4EYHAnwx_LBsjC6mzQSdWjvmyVCw_CDy61Yi4_9XKAh14y44MeYLAo/w640-h480/figure8.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖3</div></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEixuwrLWvbRPVF21rqSh36bsTUyyvfZANrKafzCoLOtmq0nWvcEflB33ATYPoPqz5bPhGNBAh7zB58ewWdVUybquHWetvwVoT_CHzXH_2obu7D-zBU4yOjwloc5g-uXs0cRg1TZISBP7epzSCB4gz1BetrnbVHV_MsAuJTAk0g-G2oUk78BZgzkgF4E26Q/s640/figure9.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEixuwrLWvbRPVF21rqSh36bsTUyyvfZANrKafzCoLOtmq0nWvcEflB33ATYPoPqz5bPhGNBAh7zB58ewWdVUybquHWetvwVoT_CHzXH_2obu7D-zBU4yOjwloc5g-uXs0cRg1TZISBP7epzSCB4gz1BetrnbVHV_MsAuJTAk0g-G2oUk78BZgzkgF4E26Q/w640-h480/figure9.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖4</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwmFTb7rspizcjuR1RJvdBcmbN4BVTBA4RAvAySrovejOz1I1ghnD2tpt21KQGcYH6JPesKhneFVzKoc7IzrKJtyib3G1fK4xozS1srSBV2Py8_76s5AzX7m6Nwwo4uApgshKKnUbsjsbLi6k-YRFw_kuEQrXjilFBM6OsNW-GQtqU-cJsQ6lKXzOatBI/s640/figure10.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwmFTb7rspizcjuR1RJvdBcmbN4BVTBA4RAvAySrovejOz1I1ghnD2tpt21KQGcYH6JPesKhneFVzKoc7IzrKJtyib3G1fK4xozS1srSBV2Py8_76s5AzX7m6Nwwo4uApgshKKnUbsjsbLi6k-YRFw_kuEQrXjilFBM6OsNW-GQtqU-cJsQ6lKXzOatBI/w640-h480/figure10.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖5</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQ075QVy2VLdkvCmdcPyVTE5Nbq0WovmmQkQnt8sakVD9mVGIauaBYr7K7anKFdKJqpF-jtdRW9Wb653sIuaVydH0hlr-qcNexEU9hpYkMUveWCu1WiyLOCIiYqjT2XG3slIKAqX7tmSPS5aikeeri6oW0uX8ESl9R9vHSBoHoy_4DoqhmmxSBsjqlwJs/s640/figure12.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQ075QVy2VLdkvCmdcPyVTE5Nbq0WovmmQkQnt8sakVD9mVGIauaBYr7K7anKFdKJqpF-jtdRW9Wb653sIuaVydH0hlr-qcNexEU9hpYkMUveWCu1WiyLOCIiYqjT2XG3slIKAqX7tmSPS5aikeeri6oW0uX8ESl9R9vHSBoHoy_4DoqhmmxSBsjqlwJs/w640-h480/figure12.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖6</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg-ymPu8ee6CDblKas3p1XAsoi3v251vDoajidk-2W1PAm3nDuq7X18XvJ__mfI2QymQqyYErm-ey4fO3pXJBYGD20_ujABMES66h5lwuMliaYWVE2mEGGzB-2e83kddOlgQL1755ty15md_itwMiCt9av-UgaKUHMKyDXjZNFxd6EhONRfFO_LjoOFrx8/s640/figure11.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEg-ymPu8ee6CDblKas3p1XAsoi3v251vDoajidk-2W1PAm3nDuq7X18XvJ__mfI2QymQqyYErm-ey4fO3pXJBYGD20_ujABMES66h5lwuMliaYWVE2mEGGzB-2e83kddOlgQL1755ty15md_itwMiCt9av-UgaKUHMKyDXjZNFxd6EhONRfFO_LjoOFrx8/w640-h480/figure11.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖7</div><br /><p></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhp52YbkUzSsNoxioo4cu0T9vhp1-fAYzv1ka8Sm-J_mE7kb3zao9nWnW3lxfy9mV64c2lybc2J6mMeHXhDxtCqiAHVxqRh4a-P04_7AGPO884tV9hmV4wSs5oqsJVFpk7sLr_or-Sp4b1pGxkaSKqgNHclFnt4W2F2f-fDS2huxjkqJWu5URRhWnC1F00/s640/figure13.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhp52YbkUzSsNoxioo4cu0T9vhp1-fAYzv1ka8Sm-J_mE7kb3zao9nWnW3lxfy9mV64c2lybc2J6mMeHXhDxtCqiAHVxqRh4a-P04_7AGPO884tV9hmV4wSs5oqsJVFpk7sLr_or-Sp4b1pGxkaSKqgNHclFnt4W2F2f-fDS2huxjkqJWu5URRhWnC1F00/w640-h480/figure13.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖8</div><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgNWLbng7jAZ5cLy5cqco3ul6FtMjaO7AxI0Jj73_BOno1SGiVo73o8UWQczxaGZEuvp9ZZuW6ZGNwLVkvTF1yJ0dm_xtIfoFkOOpYlSPa2uzLW3A6tMRGRNzhXhtXEhNbnqgAEcCku6MqI22e5D48MDVOaQsgGH2KDLzCgUeNnIs7OGhZfQZdZExVN9Gs/s640/figure14.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgNWLbng7jAZ5cLy5cqco3ul6FtMjaO7AxI0Jj73_BOno1SGiVo73o8UWQczxaGZEuvp9ZZuW6ZGNwLVkvTF1yJ0dm_xtIfoFkOOpYlSPa2uzLW3A6tMRGRNzhXhtXEhNbnqgAEcCku6MqI22e5D48MDVOaQsgGH2KDLzCgUeNnIs7OGhZfQZdZExVN9Gs/w640-h480/figure14.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖9</div>
<p class="MsoNormal"><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p> </o:p></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEicPjDPEyQnhZ3z6-IozY6o-VGeDtJzrC4xscrci-kPLZhe25-xfn2LpGvDrhiPQiDmSfh66DEX_kkRQkr0ds3HVTIRfkEZQHmfMYqF_a1sjtYPjbWAuHhBlcXciyKfRyA9fRi2g76FURbOZ9GkBPGo2bbfzEulduelvT3voctK7350_gDkIcp4QcShoOM/s640/figure15.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEicPjDPEyQnhZ3z6-IozY6o-VGeDtJzrC4xscrci-kPLZhe25-xfn2LpGvDrhiPQiDmSfh66DEX_kkRQkr0ds3HVTIRfkEZQHmfMYqF_a1sjtYPjbWAuHhBlcXciyKfRyA9fRi2g76FURbOZ9GkBPGo2bbfzEulduelvT3voctK7350_gDkIcp4QcShoOM/w640-h480/figure15.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;">圖10</div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-2608442431280572222023-06-28T18:10:00.000-07:002023-06-28T18:10:24.987-07:00基本概念:黑膠唱頭之針尖與針桿的各種角度參數<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">在三度空間裡,必須有</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">X<span lang="ZH-TW">,</span>Y<span lang="ZH-TW">與</span>Z<span lang="ZH-TW">軸三方向的座標來標定物體位置。空間裡任何兩條直線之間的相對關係,在三個方向都要分別去標示,才能正確顯示兩直線在空間裡的角度特性。唱頭的針尖與針桿角度也不例外,相對於任何一基準線或面,各自都有三個角度數值要列入考量。在一個唱頭(少數無針桿者除外)上,針桿相對於唱頭身</span>/<span lang="ZH-TW">外殼的基準線,從上方(或底部),正面及側面觀察會有三個角度數值。針桿相對於唱片表面,也有三個角度值。而針尖相對於針桿,或相對於唱片表面,也各有三個角度。瞭解這些角度的定義與影響,對調整唱頭唱臂的參數,會有比較清晰的概念。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">廠方製作唱頭時,大多數由手工安裝組合各個零件。在</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">MC<span lang="ZH-TW">動圈式唱頭的場合,像是圖</span>1<span lang="ZH-TW">的例子,發電線圈(</span>coil<span lang="ZH-TW">)會安裝於針桿中後段位置,之後有類似橡皮的彈性阻尼(</span>damper<span lang="ZH-TW">),然後阻尼會靠在後方磁極(</span>pole piece<span lang="ZH-TW">)上。針桿後段會穿過後方磁極上的小孔,最末端由懸吊鋼絲(少數為其它材質)拉住,固定在唱頭內部後側的小螺絲。這樣組裝好之後,藉由調整懸吊鋼絲及阻尼,會決定針桿的初始角度。由於懸吊與阻尼都是有彈性的,在播放唱片時,針桿角度會因受力而有些許改變。唱頭所處環境的溫度濕度等條件改變時,阻尼的軟硬程度與懸吊的張力都會發生變化,也會對針桿角度有所影響。由於</span>MC<span lang="ZH-TW">唱頭針桿上有線圈,線圈又有</span>4<span lang="ZH-TW">條輸出導線附著,加上針桿後端懸吊鋼絲拉住,更換針尖針桿時需將整個唱頭拆解,才能處理。近年來重新出現的光電唱頭,線圈部分由遮光罩取代,磁鐵磁極由發光二極體與感光元件取代,其它機械部分與</span>MC<span lang="ZH-TW">唱頭大致類似。至於</span>MM/MI<span lang="ZH-TW">唱頭,如果針尖</span>/<span lang="ZH-TW">針桿是使用者可自己拆卸安裝的,阻尼是跟著針桿一起位於可拆下的部分,針桿末端就沒有鋼絲。有些</span>MM/MI<span lang="ZH-TW">唱頭,則不能讓用家自行拆卸針尖針桿,可能在針桿末端有用了鋼絲做懸吊。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">而唱頭製作時,絕大多數的情況,針尖與針桿的部分都是由從事寶石加工的</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">OEM<span lang="ZH-TW">廠商所供應。唱頭廠方會要求用何種鑽石材質,例如比較低價的可能是由鑽石粉加工成形,中價位的可能是針尖最前端是鑽石原石,然後黏著在後段的其它材質上。比較高價的則是整個針尖是由鑽石裸鑽(</span>nude
diamond<span lang="ZH-TW">)所構成。播放時針尖與溝槽接觸的部分是兩個截面,截面大小與形狀會因針尖的形狀,以及唱頭調整角度而有所不同,在後面會有比較詳細的討論。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">黑膠播放所使用的器材裡,唱頭的零件數或許最少,但些許製造或組裝誤差,都會造成相當大的影響,故而需要各種工具及精細的眼手協調技能來達成。即使人員處於最佳狀態完全沒有出錯,在顯微鏡下的作業,也很難將每個成品維持在恆定的水準。因此即使是同一廠牌同一型號的唱頭,不同的樣本之間,也一定會存在某種程度的差異。而誤差的來源,主要有</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">1<span lang="ZH-TW">)針尖本身加工研磨時的誤差,</span>2<span lang="ZH-TW">)針尖安裝於針桿的誤差,</span>3<span lang="ZH-TW">)針桿安裝於唱頭的誤差,</span>4<span lang="ZH-TW">)唱頭內部組件如線圈,磁鐵,阻尼等等的性質與安裝角度之誤差。其中</span>1<span lang="ZH-TW">)與</span>2<span lang="ZH-TW">)是</span>OEM<span lang="ZH-TW">提供給唱頭廠家時就會存在,尤其</span>2<span lang="ZH-TW">)的誤差範圍在各個方向可能到正負</span>2<span lang="ZH-TW">度到甚至</span>5<span lang="ZH-TW">度都有。唱頭廠家收到後,遇到針尖歪斜的情況,如果沒超過合約上規定的範圍,是無法退貨回給</span>OEM<span lang="ZH-TW">的。這時唱頭廠家的處理方式,有些會將之淘汰不用,但這樣會增加許多成本。有些會想法自己將針尖角度修正,但技術上並不容易。有些則硬著頭皮還是將之組裝成唱頭出售,認為反正一般消費者也看</span>/<span lang="ZH-TW">聽不出來。</span>3<span lang="ZH-TW">)的狀況,除了唱頭組裝時的人為誤差之外,還有可能是在出廠時是正的,但放置一段時間後,由於溫度濕度等因素,使得阻尼</span>/<span lang="ZH-TW">懸吊等產生變異,而使針桿變歪。至於</span>4<span lang="ZH-TW">)的誤差,不容易以視覺判定,要靠播放測試訊號,用儀器測量數據來間接觀察。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">消費者在收到新唱頭時,最好以顯微鏡觀察唱頭,對上述</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">1<span lang="ZH-TW">),</span>2<span lang="ZH-TW">)與</span>3<span lang="ZH-TW">)的誤差,可以得到大致的概念,在後續的調整過程,可以作為參考指引。例如相當常見的,唱頭正面針尖角度誤差,如圖</span>2<span lang="ZH-TW">中明顯的可以看出針尖有逆時針方向的偏差,會對</span>azimuth/HTA<span lang="ZH-TW">的調整造成相當的影響。這時觀察到偏斜的方向及角度,就可以作為調整時的方向與角度多寡的依據,比較不用花太多時間尋找最佳點。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">側面的角度誤差會影響到</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">VTA/SRA<span lang="ZH-TW">,如果在這時能如圖</span>3<span lang="ZH-TW">先測量針尖與溝槽接觸處及針桿之間夾角,裝到唱臂上之後,就可以從觀察針桿與唱片平面的角度,推算出</span>SRA<span lang="ZH-TW">的角度是多少。在這個例子,線</span>/<span lang="ZH-TW">桿夾角是</span>114<span lang="ZH-TW">度,那針桿就要與唱片平面成</span>24<span lang="ZH-TW">度,</span>SRA<span lang="ZH-TW">才是</span>90<span lang="ZH-TW">度。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">至於底部的</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">zenith<span lang="ZH-TW">(有人稱之為天頂角),一般來說偏離的情況算比較少些。但如圖</span>4<span lang="ZH-TW">,</span>5<span lang="ZH-TW">裡,定價</span>7<span lang="ZH-TW">千美金以上的唱頭,就明顯的有歪斜的狀況。用唱頭的針桿來對準尺規,而不用唱頭外殼為準,是許多「專家」會堅持的。但在這兩個情況要思考的是,如果用針桿來對準調整,顯然不會得到最佳設定。而在這兩個唱頭,製作者似乎知道有這個誤差的情況,而將針桿安裝偏一點角度來補償,而非平行於唱頭外殼。所以如果看到一個新唱頭的針桿不太正,或許是有其背後道理的。因此在唱頭安裝前,有了這樣的認知,在用尺規調整時,才能決定怎樣處理比較好。</span><o:p></o:p></span></p><p class="MsoNormal"><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p><p class="MsoNormal"><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh7HCinFvzrEFoKP7nPPs_hRAV2EB9cUlUgH30TxJJhBdG5dTmZFQ2OJid8AHG4r5qpShqV7S4BZLX3GfPJiTmOaejRcTzrQTCyOqK9cFvP5tqfAJlb3vj5-a46xT4Yw_iTylQHUXLDNEMC7NXaVJYkkiff6uLiVfv1FO_Z0nTOIILSGeq-EBW1b8-7E90/s640/figure1.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh7HCinFvzrEFoKP7nPPs_hRAV2EB9cUlUgH30TxJJhBdG5dTmZFQ2OJid8AHG4r5qpShqV7S4BZLX3GfPJiTmOaejRcTzrQTCyOqK9cFvP5tqfAJlb3vj5-a46xT4Yw_iTylQHUXLDNEMC7NXaVJYkkiff6uLiVfv1FO_Z0nTOIILSGeq-EBW1b8-7E90/w640-h480/figure1.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhjfvqibX9hHbv0enty90Z741FHKSvrItQ3QHBT3aRcWciqoy4o-glmd6Qu5M057labjc6rdhTNIAN0pwEpvR4UgqanziEPCdWTCixKZuPQ_BC_j6Urq6ZVFjnOYOUIjyn_RndkB41okye_G-hVWrZM6Ru012JAPPYeBU5Bnsrw4i3E5OL6keQK1i5jXG0/s640/figure2.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhjfvqibX9hHbv0enty90Z741FHKSvrItQ3QHBT3aRcWciqoy4o-glmd6Qu5M057labjc6rdhTNIAN0pwEpvR4UgqanziEPCdWTCixKZuPQ_BC_j6Urq6ZVFjnOYOUIjyn_RndkB41okye_G-hVWrZM6Ru012JAPPYeBU5Bnsrw4i3E5OL6keQK1i5jXG0/w640-h480/figure2.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj186zlv6u2ModLyF4Q3k10_3_Ar7mhaf6fO6Y4Zn2zIW1bbu4JSFECcaSQciWo04w7Q-rj2C_okQiRUnY9dCp6eYMLjUm2hpObRHZPXi5QLIKztaLFhH3d5uzVDxoltoe5e5KM-13_rtOBKVQ2pgykRbOmgtGIAP8yJUVyLWtUIQUQijTN54Cu5DhUwN8/s640/figure3.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="640" data-original-width="480" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj186zlv6u2ModLyF4Q3k10_3_Ar7mhaf6fO6Y4Zn2zIW1bbu4JSFECcaSQciWo04w7Q-rj2C_okQiRUnY9dCp6eYMLjUm2hpObRHZPXi5QLIKztaLFhH3d5uzVDxoltoe5e5KM-13_rtOBKVQ2pgykRbOmgtGIAP8yJUVyLWtUIQUQijTN54Cu5DhUwN8/w480-h640/figure3.jpg" width="480" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiqetUykqWW58k8I6ZsuI4IhJDvHLteYZ_w_GQR1iyIdix-lAu_Y1mmge18HO_wKb4PYhCWHbkjNHb8DpM1Op-yrjxFQEhPB6NKmOzcRj9X-HUwQ_tpBc-udYPjQcOdPlObUBjc9j17d7L1HnGTfR1G5RsI22WF525jt-3cerFXmj_L4sV5mk_0zq88DeQ/s640/figure4.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiqetUykqWW58k8I6ZsuI4IhJDvHLteYZ_w_GQR1iyIdix-lAu_Y1mmge18HO_wKb4PYhCWHbkjNHb8DpM1Op-yrjxFQEhPB6NKmOzcRj9X-HUwQ_tpBc-udYPjQcOdPlObUBjc9j17d7L1HnGTfR1G5RsI22WF525jt-3cerFXmj_L4sV5mk_0zq88DeQ/w640-h480/figure4.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjq4_AEOo6et-miCnjT5XJV-9E2YaBOg1tGQNQbhb_MBARIcgVoJhm7vb8wAoMNo7ZdmH8UPlfmkriNPjgTEiSTEXjA4Ardi3sT7I5CyQw6c0As2rbL9yFl3nsTE6WReh6fiiNVWjMMlWs-IAxHeVCh1ZPtR3qIceB744qeIJYpQpF9dAoZYSBvxIe9VYQ/s640/figure5.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="480" data-original-width="640" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjq4_AEOo6et-miCnjT5XJV-9E2YaBOg1tGQNQbhb_MBARIcgVoJhm7vb8wAoMNo7ZdmH8UPlfmkriNPjgTEiSTEXjA4Ardi3sT7I5CyQw6c0As2rbL9yFl3nsTE6WReh6fiiNVWjMMlWs-IAxHeVCh1ZPtR3qIceB744qeIJYpQpF9dAoZYSBvxIe9VYQ/w640-h480/figure5.jpg" width="640" /></a></div><br /><span lang="ZH-TW"><br /></span><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-3631460474101031522023-03-23T19:26:00.000-07:002023-03-23T19:26:19.760-07:00氣浮正切臂的先天優/缺點考量及性能最佳化原則之4:供氣與氣路維修保養<p> <span style="font-family: 新細明體; font-size: 12pt;">在氣浮軸承,壓縮空氣取代了一般軸承的滾珠或刀鋒,所以空氣也等於是軸承的一部份。供氣不但是讓它能正常運作而已,而且供氣的品質會直接影響到軸承的性能。首先要考慮氣壓的穩定,任何壓力變動或振動都會反應出來,影響到音質。如果幫浦的輸出壓力不高,使用時幫浦需要持續打氣。不論是多安靜,振動多小的幫浦,它輸出的壓力必然存在固定週期的小起伏。氣瓶的角色,就像是電容器處理電壓的波動,可以讓氣壓更接近恆定。理想上最好要整合高壓幫浦與氣瓶,而且裝設了氣壓迴路控制,在氣瓶壓力到達設定值時,就會自動停止幫浦動作,僅由氣瓶供氣。而幫浦如果僅在壓力到低水位時才動作,平常都由氣瓶供氣,就可以讓氣壓更穩定起伏更小。</span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">另外還要注意保持整個氣路的清潔,因此幫浦種類的選擇,要以無油式的優先,否則長久下來,氣浮軸承會容易被殘油卡住。從幫浦出來的壓縮空氣,也一定要將任何水分</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">雜質都過濾乾淨。尤其是像</span>Air
Tangent<span lang="ZH-TW">的圓管,出氣孔非常小,到肉眼看不到的地步(如圖1</span><span lang="ZH-TW">),更容易被雜質卡住,影響出氣順暢。因此建議使用氣浮臂的用家,最好要要定期保養整個供氣線路。同時氣浮臂軸承也要仔細檢查清理,否則性能可能逐漸低落,摩擦力越來越大。</span><o:p></o:p></span></p>
<p class="MsoNormal"><b style="mso-bidi-font-weight: normal;"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">氣浮正切臂的先天優</span></b><b style="mso-bidi-font-weight: normal;"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">缺點考量及性能最佳化原則之</span>5<span lang="ZH-TW">:接地與震動處理</span><o:p></o:p></span></b></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">由於氣浮臂是在一層空氣上活動,與安裝處的唱臂座沒有固態接觸,即使臂管是用金屬材質製成,在電氣特性上,臂管是屬於漂浮而沒有接地的狀態。因此,如果看到氣浮臂的輸出只有</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">4<span lang="ZH-TW">條線,表示臂管與唱頭並沒有接到地。目前見到的唯一例外,是</span>London
Reference<span lang="ZH-TW">,有特別接一條地線至唱頭蓋,因此總共有</span>5<span lang="ZH-TW">條導線出來。其它的氣浮臂,如果是裝電感量低的</span>MC<span lang="ZH-TW">唱頭,也許還不會有問題,但如果裝電感高的</span>MM<span lang="ZH-TW">頭,附近又有馬達等干擾源,就容易產生感應的哼聲。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">以</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">ET<span lang="ZH-TW">─</span>2<span lang="ZH-TW">為例,它的臂管是非金屬材質,臂管內的訊號導線有金屬屏蔽網包覆,這是正確的作法。但是導線離開臂管之後,卻沒有將金屬屏蔽網的導體延伸至唱臂外讓使用者可以去接地,這樣電磁屏蔽作用會非常有限。我安裝</span>ET2<span lang="ZH-TW">的位置,距離實驗室裡</span>Immedia RPM<span lang="ZH-TW">─</span>2<span lang="ZH-TW">唱盤的馬達相當近,用電感量高的</span>MM<span lang="ZH-TW">唱頭例如</span>Audio Technica
AT<span lang="ZH-TW">─</span>95E<span lang="ZH-TW">,就會感應出哼聲。在嘗試各種方法後,目前是用一條細小的銀線,直接將金屬隔離網連接到唱臂塔的接地螺絲(如圖2</span><span lang="ZH-TW">),這樣就能將哼聲幅度降低</span>20dB<span lang="ZH-TW">左右,整體安靜度與音質細膩度也大幅提升。因為這線只是一般導線拆開後的其中一蕊,因此質量與硬度都很低,測試結果對氣浮軸承的移動沒有影響。當然最理想的方法,是讓這蕊線連同原來的訊號線從軸承的橫管穿過一起出來,但這需要不少的拆解組合功夫,就等以後再說了。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">另外,由於氣浮臂是浮在空氣上,對外界傳來的震動,會比其它軸承臂要來得有免疫力。但反之,對於唱頭播放時產生多餘能量的傳遞,都會比傳統臂要差一些。而且,從進氣管連接處也會傳來幫浦運作及氣流產生的震動。我用了老式的有線電話話筒的捲線(光滑商場附近有賣),將進入唱臂前的氣管纏繞拉緊,用來抑制殘餘的震動,在音質上對整體透明度與低頻解析有相當大的幫助。如果有主動式除震台,可以將氣管靠在或鎖在除震台上(如圖3</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW">),藉由主動除震將殘餘震動消減。像是</span>Zorin<span lang="ZH-TW">氣浮臂,由於所需氣流量大,即使加了氣瓶,幫浦還是要持續運作。將進入唱臂前的氣管,用螺絲鎖住固定在</span>Accurion<span lang="ZH-TW">主動除震台上,音質上有非常明顯的進步。</span><o:p></o:p></span></p>
<p class="MsoNormal"><b style="mso-bidi-font-weight: normal;"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 14.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">結語</span></b><b style="mso-bidi-font-weight: normal;"><span style="font-family: 新細明體; font-size: 14.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></b></p>
<p style="background: white;"><span lang="ZH-TW" style="font-family: 新細明體; mso-ascii-font-family: "Times New Roman"; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: "Times New Roman";">氣浮唱臂,如同各種唱臂設計,不管是傳統滾珠,單點,雙點,類單點,或各種正切式,都有其先天的優缺點。設計者在選擇了一種基本工作原理之後,就要想辦法去將優點發揮至最大化,將缺點最小化。而且一般都要經過一段時間的市場考驗,累積使用者經驗回饋,理解到它的缺點所在然後加以改良,才會逐漸得到接近成熟的產品。此外,以前在專欄文裡數次提到,由於唱頭的特性千變萬化,一支唱臂很難照顧到所有需求。所以用家在搭配時,也要花點心思,並非用簡單的價位思維就必然會有良好結果</span><span style="mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p style="background: white;"><span lang="ZH-TW" style="font-family: 新細明體; mso-ascii-font-family: "Times New Roman"; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: "Times New Roman";">氣浮臂的主要設計目的之一,是為了達到正切。但也付出許多其它方面的代價,而且如同前面討論,調整使用與保養等方面,有許多與一般唱臂不同且相對不便之處。</span><span style="mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast;">Stereophile
</span><span lang="ZH-TW" style="font-family: 新細明體; mso-ascii-font-family: "Times New Roman"; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: "Times New Roman";">雜誌的主筆</span><span style="mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast;">
Michael Fremer</span><span lang="ZH-TW" style="font-family: 新細明體; mso-ascii-font-family: "Times New Roman"; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: "Times New Roman";">就主張,以他的經驗,這些小問題累加起來,使得氣浮臂的弊多於利。但是,也還有許多的氣浮臂的擁護者,堅持它才是王道。據我這些年來測試各種氣浮臂的經驗,如果調整設定正確且與唱頭搭配良好,氣浮正切臂的確有些音質方面的優勢,是一般唱臂無法達到的。數十年的友人,黑膠教主</span><span style="mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast;">L</span><span lang="ZH-TW" style="font-family: 新細明體; mso-ascii-font-family: "Times New Roman"; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: "Times New Roman";">先生,從</span><span style="mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast;">20</span><span lang="ZH-TW" style="font-family: 新細明體; mso-ascii-font-family: "Times New Roman"; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: "Times New Roman";">多年就前開始使用氣浮臂,至今歷經多次維修保養,都未曾改用其它唱臂為主要參考臂,由此可見一斑。</span><span style="mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p style="background: white;"><span style="font-family: 新細明體; mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p> </o:p></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhySuM6ZhyUW8oC7RL0fir7b5RlvmH-iw5jX0Cm42wjjegul0jU1VPlmt2aobSBpFomynaLk4UA-qqXLOPsYpxgPAc9N1Ps61_6unOkFJTN1nj-Ge82huppZss2nFjONi10LLxIqqfokywd9WhUio_Jh7catsoxvOpnJES22VdBUUeD6GJZKwhkLnxC/s4000/figure10.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3000" data-original-width="4000" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhySuM6ZhyUW8oC7RL0fir7b5RlvmH-iw5jX0Cm42wjjegul0jU1VPlmt2aobSBpFomynaLk4UA-qqXLOPsYpxgPAc9N1Ps61_6unOkFJTN1nj-Ge82huppZss2nFjONi10LLxIqqfokywd9WhUio_Jh7catsoxvOpnJES22VdBUUeD6GJZKwhkLnxC/w640-h480/figure10.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQZUZ899bU4nbWey-FSCRvVQaSwnMTtmFir5Z3O10RBVGbo2hrUtetGwH34lD-aLhtqwiUR2ew8xCbVuruT2otSZq29DTW9EKQ9WlOlqVdQIhr7opevmlZpEoNY8OF2JGS3PWiCZdKBBjViBjgk14h6DfZd2ET2w9DzGCMeW_qKTNUeyqsOs6hUeyC/s3264/figure9.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjQZUZ899bU4nbWey-FSCRvVQaSwnMTtmFir5Z3O10RBVGbo2hrUtetGwH34lD-aLhtqwiUR2ew8xCbVuruT2otSZq29DTW9EKQ9WlOlqVdQIhr7opevmlZpEoNY8OF2JGS3PWiCZdKBBjViBjgk14h6DfZd2ET2w9DzGCMeW_qKTNUeyqsOs6hUeyC/w640-h480/figure9.JPG" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgQA_ZTX_nAhVUrymfXeoCeAowp-jQbquJngZis36aancnvQmJ2VDNsUVkP34uroJABV3xArv7gAdpN__ytBF3z25gn7IZm-2nhfLwW9GXWCX9vYnONaGVEdhVBTIkSAAWmhVH8WBoiRHqs1fDtoUsypvnd-KVvcubGT8fNAOJmMBNUGLAna0vaAXve/s4000/figure8.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3000" data-original-width="4000" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgQA_ZTX_nAhVUrymfXeoCeAowp-jQbquJngZis36aancnvQmJ2VDNsUVkP34uroJABV3xArv7gAdpN__ytBF3z25gn7IZm-2nhfLwW9GXWCX9vYnONaGVEdhVBTIkSAAWmhVH8WBoiRHqs1fDtoUsypvnd-KVvcubGT8fNAOJmMBNUGLAna0vaAXve/w640-h480/figure8.jpg" width="640" /></a></div><br /><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-26898343875485361592023-03-23T19:23:00.002-07:002023-03-23T19:23:14.177-07:00氣浮正切臂的先天優/缺點考量及性能最佳化原則之3:側向力的考量,水平調整,訊號線/氣管干擾<p> <span lang="ZH-TW" style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">一般傳統支點臂的先天缺點,除了必然存在的循軌誤差之外,因為存在有補償角(</span><span style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">offset angle<span lang="ZH-TW">),唱針在溝槽裡運動時,摩擦力的方向,與唱臂軸承中心存在有一個角度,而造成向內的分力。在多數的唱臂設計,是以抗滑的方式來對付,如果設計得當,使用時大多可以將負面影響最小化。那正切臂是否就可以完全避免側向力的問題呢?</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">首先我們要考慮的是,唱頭的針桿與直線正切唱臂之間,由於唱頭製作及安裝時的誤差等因素,是不可能完全平行的。只要兩者之間存在著非零度的夾角,播放時唱針受到牽引的力量,向內或向外側向力還是會產生。而且在直線正切臂的情況,由於慣性質量較高,受到任何微小的側向牽引時,加諸於唱針與針桿的壓力,會比支點臂還要高出許多。</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">水平的校正,對任何一種唱臂來說都很要很精準,才能讓唱頭發揮最佳音質。而在直線正切臂的場合,由於橫向慣性質量高,任何傾斜都會產生更大側向力。所以除了音質上的考量,這也是延長唱頭壽命,避免唱頭損壞的必要條件之一。故而在觀念上,要把水平校正視為減低側向力的一個關鍵環節。建議步驟如下:</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">1<span lang="ZH-TW">)在安裝唱頭之前,要先確認針桿是否有可觀察得到的歪斜。若有歪斜,在鎖定螺絲時要加以補償修正,讓針桿盡量平行於臂管。然而即使如此,也不可能作到完全平行,還是會有些許誤差,必須用接下來調整水平的步驟一起修正。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">2<span lang="ZH-TW">)用精密度足夠的水平儀,將唱盤轉盤表面調至完全水平。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">3<span lang="ZH-TW">)藉由調整唱臂的安裝螺絲,於零針壓狀態,把臂管調整到不會橫向移動。但重要的是只調整唱臂,不去動唱盤以維持轉盤表面水平。這時還要特別注意觀察,在零針壓狀態,輸出訊號線對唱臂移動的影響。尤其是在唱片外圈與內圈位置,是否有拉扯或阻撓的現象。目前我的處理方式,是如圖1</span><span lang="ZH-TW">裡,用喝珍珠奶茶的吸管將訊號線架高,而將來自訊號線撓性的拉扯降到最低。而</span>Air Tangent<span lang="ZH-TW">的訊號線輸出端,有一個塑膠套管可以旋轉來調整安排線的角度(如圖2</span><span lang="ZH-TW">),是相當聰明周到的設計。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">4<span lang="ZH-TW">)播放無溝紋的唱片或最好是完全平的</span>LD<span lang="ZH-TW">片(如圖3</span><span lang="ZH-TW">),如果唱臂會往一個方向移動,代表還存在明顯側向力。這時要稍微修正</span>3<span lang="ZH-TW">)裡的唱臂安裝螺絲來補償,但是如果發現要修正很多,就先回步驟</span>1<span lang="ZH-TW">去確認針桿角度,修正後再回來這步驟。不過有些氣浮唱臂,固定於唱盤的螺絲並不能用來調整水平,這時候就只能靠調整唱盤的水平來作修正。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">5<span lang="ZH-TW">)播放一般用來調抗滑的測試唱片,看或聽兩聲道的失真大小是否接近一致。如果不是,代表唱頭所受側向力還是相當大,就要再回去前面</span>4<span lang="ZH-TW">個步驟,重先調整確認。</span><o:p></o:p></span></p><p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p><p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwugdbPB-mkCjRziPl3_wz5IdRbriYkIFmp_J0-MTSOocEdSzmYMFGQ3Zj91ejOlzQIlOI3e25im8JZNfsZs_ifvcuyPaJxrd9VSUjzPNZjaSsShEQdixLY3nhp1jSak8LJxLT_P0LK9MVpoaYToVisq5yYphY2kD497T9fmUX6oYQYoNd7mZBqGkn/s3264/figure5.JPG" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjwugdbPB-mkCjRziPl3_wz5IdRbriYkIFmp_J0-MTSOocEdSzmYMFGQ3Zj91ejOlzQIlOI3e25im8JZNfsZs_ifvcuyPaJxrd9VSUjzPNZjaSsShEQdixLY3nhp1jSak8LJxLT_P0LK9MVpoaYToVisq5yYphY2kD497T9fmUX6oYQYoNd7mZBqGkn/w640-h480/figure5.JPG" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjpOGTmzLFLlEVzmc85UfhXOBEJlFfPQaMo6tleneZ8AolqWrtwswEGuYMYuSn3FfGtsVpDV5_CXbt31MrX8u9seX0yVSjWe9WXTae-g4XS5aj7wLuj18RkfOZI5vJheKwnQPIAGa6s3mD-4ByF8qDhq8ot555pFq_gjKOzzUAT11ukYypRH-Q4aufp/s4000/figure6.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3000" data-original-width="4000" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjpOGTmzLFLlEVzmc85UfhXOBEJlFfPQaMo6tleneZ8AolqWrtwswEGuYMYuSn3FfGtsVpDV5_CXbt31MrX8u9seX0yVSjWe9WXTae-g4XS5aj7wLuj18RkfOZI5vJheKwnQPIAGa6s3mD-4ByF8qDhq8ot555pFq_gjKOzzUAT11ukYypRH-Q4aufp/w640-h480/figure6.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi2id0N9qO764xIPkAvuw84pzondJrU5_6gSHFoN2mSIFqbwukBDfPixjH2z14NaM6kauf9Q6NLrDZLNwF8bFEnjfhvv2sxcg6Ez4UQo53YStEIMwapQn3EPYi82Rl8g1kYxKx--idoswvL4L6cfwQZ3JzmrZ036rt7nGIXI9euJNybrWaQ8PevXI8G/s4000/figure7.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="4000" data-original-width="3000" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi2id0N9qO764xIPkAvuw84pzondJrU5_6gSHFoN2mSIFqbwukBDfPixjH2z14NaM6kauf9Q6NLrDZLNwF8bFEnjfhvv2sxcg6Ez4UQo53YStEIMwapQn3EPYi82Rl8g1kYxKx--idoswvL4L6cfwQZ3JzmrZ036rt7nGIXI9euJNybrWaQ8PevXI8G/w480-h640/figure7.jpg" width="480" /></a></div><br /><span lang="ZH-TW"><br /></span><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-27950872646322932982023-03-23T19:17:00.004-07:002023-03-23T19:17:58.960-07:00氣浮正切臂的先天優/缺點考量及性能最佳化原則之2:慣性質量<p> <span style="font-family: 新細明體; font-size: 12pt;">在與朋友在討論唱臂的設計時,不時會有人說,那將正切唱臂做得和刻片機的動作原理一模一樣,不就好了嗎?乍聽之下,似乎很有道理。但實際上,問題卻並非那麼單純。首先要瞭解的基本差異是,刻片機刻片時,從外到內圈的移動,是主動式的運動。也就是說,刻出來的溝槽往內以螺旋轉入,是由刻片師決定以何速率來推進。但在播放唱片時,唱臂是處於被動的狀態。它由外往內的運動,是由溝槽導引唱針,施力於針桿,然後帶動唱臂所致。這時,克服唱臂軸承的摩擦力及移動慣性質量所需的力,就幾乎都由唱針與唱頭來承受。而且,因為唱片在壓製時,一定存在某種程度中心不正的情況,所以唱頭的針尖與針桿,持續地存在內外交互搖擺的運動。因此,如果唱臂的慣性質量較高或移動時的摩擦阻力大,加上唱頭所受的外力隨時都在變更方向,由此可以想見,針尖與針桿受到來回的側向力度是相當可觀的。</span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">但是,從另一方面來考量,我們要記得,唱頭的發聲,是靠針尖的上下左右振動帶動發電機構產生的。所以,假如唱臂的質量太輕,輕到隨著針尖同時一起同步運動,那唱頭就無法感應到這些振動,失去了溝槽裡的資訊。因此,唱臂在垂直方向要提供適當的針壓,而且水平與垂直方向都要有足夠的慣性質量,來提供一個穩定平台,讓針尖可以忠實地拾取溝槽裡的訊息。此外還要考慮到與唱頭搭配時,低頻共振的問題。如果太高,已經到音樂訊號的低頻範圍,就會造成低頻響應的問題。而太低的話,接近唱片偏心或不平的頻率,又可能引起抖動的問題。所以要設計一支可以與多數唱頭搭配的好唱臂,需要考量的因素,有相當的複雜程度。而以上這部分的考量,還只是冰山的一角而已。</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">一般支點臂,重錘位於槓桿之後,因此在橫向移動時,整個移動部分的質心,距離軸心支點不遠,所需的力並不大───像是</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"> Graham Phantom<span lang="ZH-TW">唱臂的設計,質心就非常接近支點。而直線正切臂(包括氣浮與滑輪式在內)的先天問題,在於整個槓桿的支點,等於在無限遠之處,而所有移動部分包括重錘等,都在支點之前,所以橫向移動時的慣性質量,會比多數的支點臂高出甚多。在唱針要帶動整個唱臂往內或外移動時,負擔會比較重,且在反應上也會略慢一些。因此,多數直線正切臂的設計者,會盡量用輕而短的臂管,來減少這種負面效應。但是,輕的臂管,與懸吊硬的唱頭,在搭配上就可能有些問題會產生。而短的臂管,也要面臨對唱片起伏不平特別敏感的問題。而前面也提到過,質量太輕的臂,又可能無法提供讓唱頭穩定發聲的依靠。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">另外一個要考慮的情況是,如果將質量大的直線正切臂裝在軟式懸吊的唱盤,它的可動部分移動時,由於質量高,將會造成重心位置的變化。像</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Linn LP12<span lang="ZH-TW">唱盤,本身的彈簧懸吊很軟,直線正切臂在播放唱片外圈與內圈時,會使懸吊起來的轉盤與唱臂部分朝一個方向稍微傾斜,引發側向力的顯著變化。因此,質量大的直線正切臂並不適合安裝在這類唱盤。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">與唱頭的搭配也需要一些特別考量。假如是用一般中等順服度的唱頭,由於直線正切臂的橫向質量大,橫向的低頻共振點就會比理想的</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">10 Hz<span lang="ZH-TW">低,會到</span>7<span lang="ZH-TW">以下。如果是順服度再高一些的唱頭例如</span>20<span lang="ZH-TW">單位,共振點甚至會到</span>5Hz<span lang="ZH-TW">或更低。這樣造成的問題,是如果唱片有中心孔不正的情況,就可能發生震盪現象而會跳針。即使沒有跳針,這些緩慢的來回擺動在某些場合也可能會引起些許頻率飄移。所以從這角度來看,直線正切臂應該要搭配順服度低的唱頭,來提高整體低頻共振頻率而避開問題。但是唱頭順服度很低,又可能會造成縱向的共振點過高,對低頻訊號的再生不利。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">如前面所說,由於橫向的慣性質量高,對唱頭針尖可能造成的壓力,會比平常的支點臂來得大很多。近年來我幫許多朋友檢查唱頭,發現到針尖兩側磨損不均勻的情況,大多數是使用直線正切臂。尤其是有些氣浮臂使用者,喜歡將氣壓調得比規格所需還低,認為可以得到較厚實的聲音表現。在某種程度上,這會把橫向慣性質量變得更高,的確有利於低頻的再生。不過當來自某些原因,例如水平歪斜或唱片中心孔不正等,而形成側向壓力時,唱頭針尖及阻尼等部位就受到非常大的壓迫,日久很可能形成唱頭損壞。</span></p><p class="MsoNormal"><br /></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-52195676524306186532023-03-23T19:16:00.002-07:002023-03-23T19:16:27.565-07:00氣浮正切臂的先天優/缺點考量及性能最佳化原則之1:正切<p> <span lang="ZH-TW" style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">正切(</span><span style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">tangent<span lang="ZH-TW">)的意義,是在播放唱片的整個過程當中,唱頭針桿與以轉盤中心的一個圓形,會形成切線的幾何關係。也就是說,任何時候從針尖拉一條直線延長,通過轉盤或唱片的圓心點,會與針桿形成</span>90<span lang="ZH-TW">度直角。從播放時的實際動作來看,正切代表的就是針尖兩側播放的時間差為零。而因為刻片機是以正切的方式來刻片,所以許多人都自然地認為,正切臂一定是比支點臂要好。但實際上,是否真的如此,要從幾個方面來思考。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">雖然從巨觀的角度來看,正切臂只要調整正確,播放時唱針的位置,是會循著正切線往內運動。但從微觀的角度,微小的誤差,還是會來自於唱臂軸承的「間隙」,以及移動時,因為較高的質量等因素引起的遲滯現象。像氣浮臂的軸承,是靠壓縮空氣支撐起來的。不論壓縮空氣的壓力有多高,在邊緣氣體排出的部分,壓力必然會急遽降低,所以氣浮軸承的剛性在這裡也會減低,形成間隙,在受力時難免就會有搖擺的現象。再加上較高慣性質量的牽引引發的遲滯現象,這時就會造成微小的循軌誤差。換句話說,正切臂上的唱頭針尖的正切移動,從微觀來看,事實上是一連串的小型圓弧運動所組成,而每個圓弧都會存在著某種程度的循軌誤差。這些小誤差的影響會有多大,就視產品個別設計及加工的精密度而定。</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">安裝唱頭時,直線正切臂所需的尺規與一般支點臂不同。如圖1</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW">裡,它套在唱盤盤面軸心,然後尺規表面有一條直線由外通往軸心的正中心點。調整唱頭時,要讓針尖在最內側靠近轉盤中心的位置,與最外側靠近轉盤外緣位置時,都要準確落在這條直線上。其它要特別注意到的細節,還包括唱頭安裝在唱頭蓋上時,螺絲孔通常還是會比螺絲的直徑大一些。因此唱頭的位置,還是有些扭轉的空間。如果唱頭的針桿確定是正的,那就要確認將唱頭與唱頭蓋之間調整至完全正交</span>/<span lang="ZH-TW">平行。如果針桿有些歪斜,或者用顯微鏡檢查時發現針尖安裝於針桿的</span>zenith<span lang="ZH-TW">角度不正,那就要從這裡作一些修正。</span><o:p></o:p></span></p><p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgdC3mDo2n9AZG_3JisCFU90x7HjH9Y8ETPaPcRGSe5Uk2pI6H4MaSkYvilY0eT3mo1JW_UYRZgFd0RZdGOxURzQlcz58JTx73Wez7_Za70SK9vRF4S5ZNDfBV41U3T-qClPUsa0FoN4-9uQkSThwD3r0lPQnyinYVzaQMdCHR8i8MenzgRZWb6SO0a/s4000/figure4.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="4000" data-original-width="3000" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgdC3mDo2n9AZG_3JisCFU90x7HjH9Y8ETPaPcRGSe5Uk2pI6H4MaSkYvilY0eT3mo1JW_UYRZgFd0RZdGOxURzQlcz58JTx73Wez7_Za70SK9vRF4S5ZNDfBV41U3T-qClPUsa0FoN4-9uQkSThwD3r0lPQnyinYVzaQMdCHR8i8MenzgRZWb6SO0a/w480-h640/figure4.jpg" width="480" /></a></div><br /><span lang="ZH-TW"><br /></span><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-23724028813747799912023-03-23T19:14:00.000-07:002023-03-23T19:14:32.689-07:00氣浮唱臂的基本原理與分類<p> <span lang="ZH-TW" style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">黑膠曾經還是主流媒體的</span><span style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">1980<span lang="ZH-TW">年代之前,氣浮正切臂並不多見。由於精密加工業的進步,在黑膠復興的今日,氣浮唱臂在市面上變得比較常出現。氣浮臂的基本工作原理其實相當簡單,就是用壓縮空氣維持固定間隙內的空氣薄層,取代一般軸承的滾珠或刀鋒等,讓唱臂可動部分懸浮其上。播放時讓唱臂與唱頭可以隨著唱片溝槽的帶動,上下且內外自由移動,而且重點在於臂身運動時不會形成固態介質之間的摩擦。但要維持可動部分穩定懸浮,而且在氣體進出流動與唱臂移動時不致引發機械性質的變化,就有相當程度的挑戰性。還有像是壓縮空氣的來源,其壓力穩定度與氣體純淨度等因素,都會影響到氣浮軸承的性能表現。而唱頭輸出訊號線或某些設計裡提供壓縮空氣的氣管,也是會造成干擾運作的主要顧慮。此外還有慣性質量的考量,與一般支點臂不同,在後面會詳細討論。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">目前看到的氣浮唱臂,其工作方式大致可以分成三大類型。最常見的是像</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Forsell<span lang="ZH-TW">,</span>London
Reference<span lang="ZH-TW">(</span>The Cartridge Man<span lang="ZH-TW">),</span>Air
Tangent<span lang="ZH-TW">及</span>Zorin<span lang="ZH-TW">的設計。如圖</span>1<span lang="ZH-TW">是</span>London Reference<span lang="ZH-TW">的軸承,圖</span>2<span lang="ZH-TW">是</span>Zorin<span lang="ZH-TW">。進氣是在固定,有微小氣孔的圓管,可動部分的套筒浮在圓管之上。這類的氣浮軸承,性質上大多屬於壓力較低,氣流量較高的設計。尤其是</span>Zorin<span lang="ZH-TW">,幫浦的出氣量高達每分鐘</span>20<span lang="ZH-TW">公升之多。這類設計的好處是構造簡單,而且可動部分可以做得相當輕盈。但是氣流量高而壓力低,空氣的進出容易形成擾流現象。而氣孔與氣孔之間的空隙,可能造成壓力的不穩,加上移動的臂身輕,播放時要維持穩定運作是設計師要克服的挑戰。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">第二類氣浮臂例如</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Versa Dynamic<span lang="ZH-TW">或</span>Kuzma<span lang="ZH-TW">(如圖</span>3<span lang="ZH-TW">)等,進氣位置是在可動部分,所以可動部分除了訊號輸出線,還要有供氣管與之連接。這類多半屬於壓力高,氣流量較低的設計。高壓的氣浮軸承剛性高且壓力較穩定,會有其音質上的好處,但加工上需要較高的精密度,搭配使用的供氣幫浦的規格也較高。而且由於氣管是附著於可動部分,再加上輸出訊號線,可能會對播放時的臂身形成較多干擾。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">第三類像是</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">ET2<span lang="ZH-TW">唱臂,壓縮空氣進入的是固定部分環繞在外,軸承可動部分反而是金屬長形圓管。這類氣浮軸承內的壓力會比第一類的高一些,而氣浮軸承的面積大且包覆完整,運動時比較不會像其它有出氣孔的設計,在孔與孔之間有壓力的起伏,動作時會較穩定。但是這樣的軸承,可動部分必須做成</span>Z<span lang="ZH-TW">字形,比較複雜,且可動部分的質量可能會比較高。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">就像所有的工程問題,這些不同的設計,都各有其先天的優缺點必須去面對克服。使用者也要在理解其原理後,讓它的優點發揮,且盡量規避其缺點。</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p><p class="MsoNormal"></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh6n6cN0rUe70iKPfNdWxlbcttiyb22E4aVtYFmbtSyHXx53fh7BDvRCPlrXFQOay9nux-E4v1qJPH3qLtl4969RjQyz3hPNo17a8WWWTwp8T9GQ6HJjy-V6STCyunKBFThx1N6vOU4C5Z2UhbqFKdIhGW_zyEflZsMcVoO_3UDulC8EU3oPSuLOtWn/s4000/figure1.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3000" data-original-width="4000" height="480" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh6n6cN0rUe70iKPfNdWxlbcttiyb22E4aVtYFmbtSyHXx53fh7BDvRCPlrXFQOay9nux-E4v1qJPH3qLtl4969RjQyz3hPNo17a8WWWTwp8T9GQ6HJjy-V6STCyunKBFThx1N6vOU4C5Z2UhbqFKdIhGW_zyEflZsMcVoO_3UDulC8EU3oPSuLOtWn/w640-h480/figure1.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgtz8YZVpLP6w-ttCEYtEy58FhyOnUo0HIHU1me-LLFv2yjioHbGIjzZW8cl_a3Cb8wc0NZZqbpLd-YTJUznJqW84jaVRBL1q0OP2erbsB_HfJ3G-yQNkHR2lKCU5eVBV1Yl_0ADEoVek9CdO3gFNGYn6lBt8ycvlqW8SENVaRTwL5d7EN0ltbWuwKt/s4000/figure2.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="4000" data-original-width="3000" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgtz8YZVpLP6w-ttCEYtEy58FhyOnUo0HIHU1me-LLFv2yjioHbGIjzZW8cl_a3Cb8wc0NZZqbpLd-YTJUznJqW84jaVRBL1q0OP2erbsB_HfJ3G-yQNkHR2lKCU5eVBV1Yl_0ADEoVek9CdO3gFNGYn6lBt8ycvlqW8SENVaRTwL5d7EN0ltbWuwKt/w480-h640/figure2.jpg" width="480" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFZllqDb5mG9Sk9fssddkLXBZZ_vmQboMkcNFlR90VGah3g0ecA2gawBPACbocJep4sTPerkpnuKB6OgzmK-e_s7Q7ALvX8FYq58Sbk67DIcZkfSAEV15wajN7avcn_eSqIfxABiFJBjQIF3K5HXSIiKsVILZJ0T_bLejzq7mPra0DNuL8sZmJqdFy/s1477/figure3.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1477" data-original-width="1108" height="640" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhFZllqDb5mG9Sk9fssddkLXBZZ_vmQboMkcNFlR90VGah3g0ecA2gawBPACbocJep4sTPerkpnuKB6OgzmK-e_s7Q7ALvX8FYq58Sbk67DIcZkfSAEV15wajN7avcn_eSqIfxABiFJBjQIF3K5HXSIiKsVILZJ0T_bLejzq7mPra0DNuL8sZmJqdFy/w480-h640/figure3.jpg" width="480" /></a></div><br /><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><br /></span><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-5518262020893396342023-03-04T18:06:00.001-08:002023-03-06T16:49:39.766-08:00何謂唱臂側向平衡及其影響<p></p><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><div class="separator" style="clear: both; text-align: justify;"><span face="新細明體" lang="ZH-TW" style="text-align: left;">唱臂的縱向平衡(</span><span face="新細明體" style="text-align: left;">longitudinal balance<span lang="ZH-TW">)就是一般看到的,用唱臂軸心後方重錘來平衡軸心前方,包括唱頭在內的負載,來得到合適的針壓。而側向平衡(</span>lateral
balance<span lang="ZH-TW">)所指的,是從正前方觀察唱臂,在其軸心點的內外側,整體的受力是否相等。一般支點臂,由於唱頭安裝處有補償角的存在,因此唱頭質量形成的負載,很有可能在唱臂軸心兩側會不一致。唱臂軸心的內外側,受力不平均,會造成什麼後果?概括來說,受力不均,必然會造成軸承轉動時,在不同角度位置,受到的阻力大小不平均。至於所造成的實際影響,這就要看是哪一種軸承設計,要各自分開來討論。</span></span></div><p></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">一般傳統滾珠軸承,在動作方向的平面轉動時,內部的滾珠會隨著滾動。滾珠與它們滾動接觸表面的面積很小,換算成壓力就很大,所以兩者的材料都要有相當硬度,才不會產生變形凹陷,並且使轉動時的阻力減至最低。當軸承受到外力負載時,滾珠與接觸面在規格內的承載下,用肉眼觀察是不會有變形出現。但是如果用微觀角度去看,還是會有極微小的形狀變異。這也是負載越大,軸承運作時遭遇的阻力會越大的原因。如果軸承所受到的負載不平均,就會造成朝其中一個方向轉動時的阻力較大,反方向較小。當唱臂在上下擺動時,會傾向於朝摩擦力大的那個方向轉動偏移過去。唱臂的設計製作,一般來說主體本身的質量分佈都是平均的,所以軸承負載應該也是均勻。只有在安裝唱頭之後,才可能會產生負載不均。在近年來為主流的</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">J<span lang="ZH-TW">型唱臂的場合,如果唱頭安裝的位置不會偏離臂管中心線很多,即使裝了質量大的唱頭,中心線兩側的負載還是會接近平衡。圖</span>1<span lang="ZH-TW">是</span>Linn Akito<span lang="ZH-TW">唱臂,它的唱頭安裝處,中央差不多對準了唱臂軸心,理論上唱頭的輕重不會影響側向平衡。如果</span>J<span lang="ZH-TW">字的補償角彎曲部分,完全落在中心線的內側,就會造成軸承內側的負載較高,應該要在中心線外側加上適當質量來平衡。而除了日本出產之外較少見的</span>S<span lang="ZH-TW">型唱臂,軸心後方掛重錘處,是偏向反向外側的角度。如果前方安裝的唱頭質量大,為了取得縱向平衡得到適當針壓,後方重錘一定也會往後調整,連帶也往</span>S<span lang="ZH-TW">字尾端的外側移出去,因此理論上側向平衡可以維持不變。圖</span>2<span lang="ZH-TW">是</span>Technics
SL-1200G<span lang="ZH-TW">的</span>S<span lang="ZH-TW">型唱臂,沒有提供側向平衡的調整機能。圖</span>3<span lang="ZH-TW">裡</span>FR64<span lang="ZH-TW">也是屬於</span>S<span lang="ZH-TW">型,但有側向平衡的調整裝置。</span><o:p></o:p></span></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">單點軸承的唱臂,如果沒有另外的穩定裝置,側向平衡會直接反應在唱頭的</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">azimuth/HTA<span lang="ZH-TW">角度。如果有一側的負載受力較多,就會像是天秤一樣,朝該側傾斜。如圖</span>4<span lang="ZH-TW">裡</span>Immedia RPM<span lang="ZH-TW">唱臂,用重錘兩側的平衡錘,左右移動來調整到所要的</span>azimuth/HTA<span lang="ZH-TW">角度。由於單點軸承的尖端通常都很小,除非整支唱臂調整到很歪的地步,軸承內外側受力的差別不會很大。但另外要考慮到的是,沒有其它穩定裝置的單點臂抗滑機構,作用時也會影響到側向平衡及</span>azimuth/HTA<span lang="ZH-TW">角度。在絕大多數的單點軸承唱臂,抗滑力的施力點都與軸承之間會形成縱向的力臂,施加抗滑力時就必然造成唱頭</span>/<span lang="ZH-TW">唱臂(從正面觀察)順時針或逆時針的旋轉,改變</span>azimuth/HTA<span lang="ZH-TW">角度。因此許多單點臂在設計時會將質心</span>/<span lang="ZH-TW">重心盡量壓低,來減少這種效應的產生。但是由於唱片的中心孔位置都或多或少有偏差,播放時還是會形成來回搖擺的情況。</span><o:p></o:p></span></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">加上輔助穩定的單點軸承臂,一般稱為「類單點」。由於有加了穩定裝置,唱臂在運作時,</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">azimuth/HTA<span lang="ZH-TW">角度比較不會受到影響。但是如果沒有達到側向平衡,雖然唱臂看起來不至於歪斜,卻會使這穩定裝置受到不平均的負載作用力。而當唱臂在播放唱片,順著溝槽帶動到不同迴旋角度時,穩定裝置受力不一致所造成的問題就會出現。</span>Graham
Phantom<span lang="ZH-TW">屬於此類,在這有比較詳細的討論:<a href="https://bingrungtsai.blogspot.com/2022/03/graham-phantom.html" target="_blank">https://bingrungtsai.blogspot.com/2022/03/graham-phantom.html</a></span><o:p></o:p></span></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">刀式軸承的場合,一般唱臂設計都是用它作為垂直方向上下擺動的軸心,橫向轉動還是用傳統滾珠軸承,</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">SME<span lang="ZH-TW">的</span>30XX<span lang="ZH-TW">系列與日本</span>SAEC<span lang="ZH-TW">的唱臂算是典型的代表。刀式軸承的兩個刀鋒分別在唱臂軸心點內外兩側,跨在</span>V<span lang="ZH-TW">型軸承架(如</span>SME<span lang="ZH-TW">)或另一刀鋒(</span>SAEC<span lang="ZH-TW">)上。如前面所提到,這些唱臂因為唱頭蓋所在處的補償角而形成是</span>J<span lang="ZH-TW">型臂,兩側的刀式軸承與下方的滾珠軸承,先天上所受負載都會有些不均勻。而且刀鋒接觸面很窄小,任何負載的差異都會被放大成為很大的壓力</span>/<span lang="ZH-TW">摩擦力差異。因此這類型唱臂,幾乎都有側向平衡的調整機制。圖</span>5<span lang="ZH-TW">是</span>SME
3010R<span lang="ZH-TW">,顯示它的側向平衡調整機構,除了內外側移動之外,還可將上面重錘前後移動來調整針壓。</span><o:p></o:p></span></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">直線正切臂的場合,由於唱頭安裝處沒有補償角,不會因為來自唱頭質量而引發側向負載不平均的問題。但由於軸承橫方向的寬度較大,因而容易發生兩端負載不一致的情形。而且橫向移動時的慣性質量,會比一般支點臂要大很多。因此若沒達到側向平衡,負面的影響會更嚴重。如果是氣浮臂,在氣浮軸承的兩端,任何微小的負載不均,都會使唱臂朝一個方向移動,對唱頭施加側向壓力,這與唱臂未完全水平的效應是一樣的。至於滾輪式的正切臂(例如</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Clearaudio<span lang="ZH-TW">出品的),幾個滑輪所受的負載若不平均,也會形成與軌道摩擦力不一致的情形而影響到運作。至於來自輸出導線與氣浮供氣管的影響,主要是在側向力方面,與軸承負載的關連性不大,之前在側向力與抗滑一系列文裡已經討論過,不再重複。</span><o:p></o:p></span></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">支點正切臂(例如</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Thales<span lang="ZH-TW">出的)的機械結構相當複雜,唱臂上有多個不同作用的軸承。側向平衡與否,所造成的影響很難分析。一般來說,建議不要裝質量太重的唱頭,而且最好是原廠有測試過,動作起來確認沒問題的品牌型號。這樣即使側向平衡無法調整,也不會有太嚴重的後果。</span><o:p></o:p></span></p>
<p style="background: white;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">直線支點臂(例如</span><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Viv Lab<span lang="ZH-TW">的),由於唱頭安裝處沒有補償角,也不像直線正切臂軸承橫向的寬度大,因此只要唱盤的水平夠精準,側向平衡的問題比較不用考慮。</span><o:p></o:p></span></p><p style="background: white;"><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj9BzuHe7e-5t4SQMP92TEFAfXs-wNsfkyOPMPB3EeEqVo4y-xAyLuEtxIRE33G7W-hNEEsFEj4DGrfQqEF1asoZzT_p9fSVC5k3os25ophoubIm10aHBJlSeL3Bkjbq_5tr4E5kNWmguLLQrmPXnBr2fC6BhUnh6SSJyV6U7cBrN91lhdk1lTA8-72/s3264/figure1.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3264" data-original-width="2448" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEj9BzuHe7e-5t4SQMP92TEFAfXs-wNsfkyOPMPB3EeEqVo4y-xAyLuEtxIRE33G7W-hNEEsFEj4DGrfQqEF1asoZzT_p9fSVC5k3os25ophoubIm10aHBJlSeL3Bkjbq_5tr4E5kNWmguLLQrmPXnBr2fC6BhUnh6SSJyV6U7cBrN91lhdk1lTA8-72/s320/figure1.JPG" width="240" /></a></span></div><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiMTKYRPrW0tOjKth2sqkVvrUIsepKF08l4tqAvNQKYUPBhRt2-_keOOvvQqUQTT4frYuez4b3TGp22RBAPXz8zfXeHZkZIt6G1G4qRLfbt2P83vqRpNu6fV0noFP6-RX8sDSUjYryrygoL5IsdasBgdn-MbLLb6n6VlERt3PZ53HJ1-V7qbEhKSeA4/s3264/figure2.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3264" data-original-width="2448" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiMTKYRPrW0tOjKth2sqkVvrUIsepKF08l4tqAvNQKYUPBhRt2-_keOOvvQqUQTT4frYuez4b3TGp22RBAPXz8zfXeHZkZIt6G1G4qRLfbt2P83vqRpNu6fV0noFP6-RX8sDSUjYryrygoL5IsdasBgdn-MbLLb6n6VlERt3PZ53HJ1-V7qbEhKSeA4/s320/figure2.JPG" width="240" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjbogwtEJoXRhe8xmraBk5t-XOoqxcXTA5iTad47ceU0ytR49EMzUtkELy7YlPYIpqmv-94E1RNXxkFWAvej98C2XNXzAqQpPv1duWTda1h7jUoQP4vlKvcN6PQtY7_f_-wTymQEtPHERz88oFyi6rR5r6epjnIqhtx2eNSKIfG6hmE9SsAos_X82IM/s3264/figure3.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjbogwtEJoXRhe8xmraBk5t-XOoqxcXTA5iTad47ceU0ytR49EMzUtkELy7YlPYIpqmv-94E1RNXxkFWAvej98C2XNXzAqQpPv1duWTda1h7jUoQP4vlKvcN6PQtY7_f_-wTymQEtPHERz88oFyi6rR5r6epjnIqhtx2eNSKIfG6hmE9SsAos_X82IM/s320/figure3.JPG" width="320" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjF7le7ajH-6gafhzRaiD07eLWLFNWjDbzvTr0Ei44GqZ5aL7PeHbGXeMIZxAeC6dx3UgEhF4YraHaeMxFnRenJXIMdjwcsUZFxYNRRjSCbCEFUSovT6u3kH6rRjj9aVixh384SGX1ieoc7qxvKlazSD0lBM6KOY0KiEiVFriO2ez6dDq1iYY9hNXsb/s3264/figure4.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="3264" data-original-width="2448" height="320" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjF7le7ajH-6gafhzRaiD07eLWLFNWjDbzvTr0Ei44GqZ5aL7PeHbGXeMIZxAeC6dx3UgEhF4YraHaeMxFnRenJXIMdjwcsUZFxYNRRjSCbCEFUSovT6u3kH6rRjj9aVixh384SGX1ieoc7qxvKlazSD0lBM6KOY0KiEiVFriO2ez6dDq1iYY9hNXsb/s320/figure4.JPG" width="240" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhN8OaoKct_1bMJRnBW48esh4aE8utY25n__PuUsOvoDoRlurcs5XCc2GDZMUyFPBWU9pofzJAKw8gBy_RVkUd5IxR9bqZHvZjy3W7YtAu10IdY18c1TqTN0kVeb44PvhKZ9Hqdi0nJ-kkQ4EaCz2rpPLXvs-2mqrOMa-vKSay7-OGr8oxyaoW0V0Xq/s3264/figure5.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhN8OaoKct_1bMJRnBW48esh4aE8utY25n__PuUsOvoDoRlurcs5XCc2GDZMUyFPBWU9pofzJAKw8gBy_RVkUd5IxR9bqZHvZjy3W7YtAu10IdY18c1TqTN0kVeb44PvhKZ9Hqdi0nJ-kkQ4EaCz2rpPLXvs-2mqrOMa-vKSay7-OGr8oxyaoW0V0Xq/s320/figure5.JPG" width="320" /></a></div><br /><span lang="ZH-TW"><br /></span></span><p></p><p style="background: white;"><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p><p style="background: white;"><span face="新細明體" style="mso-ascii-theme-font: minor-fareast; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-17711225281253243042023-03-04T17:55:00.004-08:002023-03-04T17:55:51.102-08:00世界上不存在完美的器材:黑膠唱臂篇<p> <span lang="ZH-TW" style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">市面上的唱臂無論是任何價位,不管是屬於傳統滾珠,單點,類單點,刀式或各種正切式等等,在實際安裝使用且仔細觀察分析之後,都必然會發現其設計</span><span style="font-family: 新細明體; font-size: 12pt; line-height: 115%;">/<span lang="ZH-TW">執行上的優缺點。設計者在選擇了一種基本工作原理之後,就要想辦法去將優點發揮至最大化,將缺點最小化。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">最常見到的問題,就是唱臂設計者,對唱頭的製造與運作,理解不夠深入,所作的一些基本假設,只有在少數唱頭的情況成立。由於唱頭特性千變萬化,無法全部涵蓋,即使有了盡可能周全的考量,然而在推出新型唱臂之前,不可能與市面上所有的唱頭都搭配測試過。而且唱臂又要安裝在各種不同唱盤,因此一個唱臂產品很難全面照顧到所有需求。所以通常都要經過一段時間的市場考驗,經過使用者在各種情況下用了一段時間之後發現問題,回報給設計者。經由這些實際經驗的累積,理解到它的缺點所在並加以改良解決,才會逐漸進化為完成度高,且接近成熟的產品,乃是不可或缺的過程。</span><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-67679939240528740232023-01-17T17:27:00.003-08:002023-01-17T17:27:35.165-08:00系統三大基礎建設之一:AC電源<p><span style="font-family: inherit;"><span face="新細明體" style="color: #333333;">所有的器材都需要電源,除了少數用電池供電以及唱盤是交流馬達的情況之外,大多數都將交流電經過變壓整流後,轉成直流電,再給器材內部的零組件使用。原始交流電源理想上是單一頻率的正弦波,但實際上經過電線傳送,到達家中前就已經受到眾多的干擾,而滲入各種頻率的雜訊。</span><span face="新細明體" lang="ZH-TW" style="color: #333333; line-height: 18.4px;">這些進入交流電源裡的雜訊,可以說無所不在。從音響系統用電的觀點來看,又可分為</span><span face="新細明體" style="color: #333333; line-height: 18.4px;">1<span lang="ZH-TW">)以無線方式進入的,以及</span>2<span lang="ZH-TW">)家裡面與鄰近公私單位的電器用品(含音響器材)所產生,以有線方式進入的。</span></span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">有線的雜訊,來自各種的電器,包括音響器材。只要是用交流電來驅動的東西,都會有電源供應器會產生雜訊進入供電線路。這些雜訊,或許本身的基音(</span><span face="新細明體" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">fundamentals<span lang="ZH-TW">)頻率不高,但連帶產生的泛音(</span>harmonics<span lang="ZH-TW">)雜訊,會向上延伸到很高的頻段。電源供應器又可細分為傳統的線性電源,以及日益普遍的交換式電源。前者產生的雜訊,頻率範圍大約是</span>10KHz<span lang="ZH-TW">到</span> 10MHz<span lang="ZH-TW">。後者則為</span>67KHz<span lang="ZH-TW">到 </span>200MHz<span lang="ZH-TW">,頻率較高而且較廣。除了電器的電源供應器之外,還有像是洗衣機,電梯馬達,冰箱</span>/<span lang="ZH-TW">冷氣壓縮機等等,也都會因電磁作用(例如反電動勢)產生雜訊反饋到電源之中。上述的污染源之外,任何數位器材,例如電腦,手機,數位影音器材等,都有石英振盪器以極高的頻率在運作。它們會產生的污染,除了以有線的方式進入,還會以無線輻射的方式傳播,然後被天線效應感應到供電線路。這些雜訊的頻率範圍,約在</span>8 MHz<span lang="ZH-TW">到</span>500 MHz<span lang="ZH-TW">。</span><o:p></o:p></span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">外來的無線雜訊是由各種方式產生且到處傳播的電波,因天線效應而進入供電迴路。像是收音機的</span><span face="新細明體" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">AM/ FM<span lang="ZH-TW">訊號,無線對講機的訊號,手機的訊號等等,都有可能被各種的導線接收,轉為導線內的訊號,最後傳遞到家中。例如屋內的內電線路,長度在</span>10<span lang="ZH-TW">米或更長的,就會成為接收中波</span>AM<span lang="ZH-TW">訊號的天線。器材用幾米以內的較短電源線,會是</span>FM<span lang="ZH-TW">訊號的天線。有些人,包括我自己以前在美國家裡,當電源沒有適當處理時,有時會從系統聽到廣播或無線電通話的聲音,就是這個道理。</span><o:p></o:p></span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">無線雜訊會經由天線作用而進入到導線裡頭。而進入的程度多寡,與進入後傳遞難易程度及造成影響的大小,就與導線外的包覆,所用導體材質,繞線方式,粗細</span><span face="新細明體" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">長短等因素都有關係。例如不同波長的無線訊號,在接收時所需的天線長度長短不同。因此,某長度的導線,會與波長接近的訊號產生交互作用而變成接收天線。由於無線訊號的波長範圍極廣,因此不論多短多長的導線,總會有訊號會被它接收,所以很難避免。而在有線雜訊方面,不同的線材傳播訊號時,是否會使雜訊的傳播較容易衰減,也影響到最後進入器材的雜訊多寡。</span><o:p></o:p></span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">不同的音響電源線會造成音質差別,幾乎每個音響玩家都有親身的體驗。這些差異的來源,大部分來自於線材是如何面對無線</span><span face="新細明體" style="color: #333333; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">有線雜訊,以及雜訊進入到器材之後的反應。舉例來說,線材</span>A<span lang="ZH-TW">對</span>X<span lang="ZH-TW">頻率的雜訊有較佳的免疫力,而線材</span>B<span lang="ZH-TW">對頻率</span>Y<span lang="ZH-TW">的雜訊有較佳免疫。如果接到同一台器材上,這器材本身對</span>Y<span lang="ZH-TW">頻率的雜訊有比較好的阻絕能力,那與線材</span>A<span lang="ZH-TW">就是比較好的搭配,因為可以將較大頻域的雜訊給擋下來。如果是同樣線材接到另一台器材,其效果可能就會反過來。在這裡,甚至線材</span>A<span lang="ZH-TW">與</span>B<span lang="ZH-TW">只是不同長度的同樣導線,都可能會產生這種現象。</span><o:p></o:p></span></span></p><p class="MsoNormal"><span style="font-family: inherit;">如果在各環節整成的直流電裡頭,還有殘存的雜訊,那不但會影響到元件的運作,而且最後就會傳到喇叭。如果是極高頻的電波雜訊,會干擾喇叭的發聲。如果是人耳可聽頻域,那就會隨著喇叭發出的音波傳入耳朵。基本上,貴的器材,為何多半會大又重,主要就是電源部分做了加強。但是,不論是多好的整流濾波線路,都不可能完美。尤其是在兩種情況,一般的音響器材,幾乎都無法有效對付:</span></p><p class="MsoNormal"><span style="font-family: inherit;">1<span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">)超高頻的無線電波雜訊。</span></span></p><p class="MsoNormal"><span style="font-family: inherit;">2<span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">)交流電正弦波的波型有缺陷。</span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW">被動式的電源處理器,在交流電通過時產生作用。基本上就是用來補強器材電源濾波線路的不足。它們運用各式過濾方式,將電源的雜訊在進入器材前擋下來。所以,只要設計的理念正確,對付</span>1<span face="新細明體" lang="ZH-TW">)的效果,通常都相當不錯。尤其是某些濾波的方式,需要大型的金屬質的箍環,一般器材受限於機身大小無法裝進去。所以這類的電源處理器,的確有其存在的必要。</span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">但是,再怎麼好的濾波器,也不能修正波型的缺陷。圖</span>1<span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">是音響展時,圓山飯店的電源波型。濾波線路可以辦得到的,就是盡量將有缺角的部分處理到平滑,但是不可能將之修飾成完美的正弦波。而不完美的正弦波,意味的是:</span></span></p><p class="MsoNormal"><span style="font-family: inherit;">A<span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">)完美的電源正弦波,代表僅有</span>60Hz<span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">的頻率。波型有問題,就有其它頻率的成分存在,很可能會穿過器材的電源整流部分,成為直流電裡的雜訊。</span></span></p><p class="MsoNormal"><span style="font-family: inherit;">B<span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">)如圖顯示,在正弦波最高點處有衰減,那器材裡電源的電容器就無法飽滿地充足電,減弱了儲存的能量,很可能也使器材聲音的動態變差。</span></span></p><p class="MsoNormal"><span style="font-family: inherit;"><span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">不完美的電源波型,有多普遍呢?我只能說,不論是在美國或台灣,幾乎都找不到誰的家中波型是完美的。最常見的,就是</span><span lang="ZH-TW"> </span><span face="新細明體" lang="ZH-TW" style="mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;">頂部被削平了。這是因為,家中所有的電器裡的電容,充電的頂點都在這個部位。所以,即使電力公司送出完美的正弦波,經過路途中這麼多電器的使用,幾乎無可避免的都會在頂部出現衰減現象。</span></span></p><p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="font-family: inherit; mso-ascii-font-family: Calibri; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-font-family: Calibri; mso-hansi-theme-font: minor-latin;"></span></p><p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; line-height: 115%;"><span style="font-family: inherit;">然而不論是多厲害的整流濾波,都不可能完美,因此需要幾種不同的方式互補,才能大致涵蓋要處理的廣泛範圍。在供電前端都先經過大型隔離變壓器,可擋下大部分的無線干擾。變壓器本身是一個低通裝置,在頻率高於某個範圍之後,訊號及雜訊就不容易通過,因此對阻絕無線電波雜訊有相當效用。但來自有線性質的雜訊,頻率大多很低,大部分還是會通過。像是大樓電梯的啟動,就會產生很低頻率的干擾,隔離變壓器(甚至其它電源處理工具)無法處理。</span></span></p><p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; line-height: 115%;"><span style="font-family: inherit;">有線性質的干擾,除了產生很難處理的雜訊之外,還會影響到電源波型。在美國與台灣超過</span></span><span style="color: #333333; line-height: 115%;"><span style="font-family: inherit;">95%<span lang="ZH-TW">的家中,我所測量觀察到的情況,在原本是平滑的正弦波頂部會出現缺角,隔離變壓器與被動式的濾波都無法修正。這所帶來的問題有幾個,首先是波型有了缺角,在頻譜組成上代表在</span>60Hz<span lang="ZH-TW">的成分外,多出了很多高頻的成分,很有可能會穿過器材的電源供應部分,而進入到直流供電,成為訊號背景雜訊。其次,波型有缺角,表示正弦波的頂端有能量損失,這會使器材的電源供應線路裡的電容器,在充電時少掉一些電量,讓儲存的能量減少,而且這種現象會是持續的。這些電容器所儲存的能量,是讓器材在瞬間需要用大電流時,可以立即提供,而在消耗之後要立即補上。如果充電與補充的過程有短少,在音質上就容易出現動態與暫態受限制的情況。也就是說,其實大多數玩家的系統,如果使用電源的波型不去更正處理,音質是處於打折扣的狀態。這時就要依賴主動再生的電源供應,例如PS Audio Power Plant 或Stromtank之類的器材來對付。</span></span></span></p><p class="MsoNormal"></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjNTf9thsbWsJ8_n6mviPB3g-HkbIdrrwQ18e4gb8uolm3V5fk_kw1RDml66xhKnX_gw_F3_LRa6PHsuzH3viXl3fTzJ56kZHPFckovBQyCkHG4wJwhA60Z-ZdCihviGC84Da3S5947H-teXB-BsM1cvQLmpMDISHPkj_rIA9ry-kOtHNkFCH9sPfJg/s1920/figure1.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1080" data-original-width="1920" height="360" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjNTf9thsbWsJ8_n6mviPB3g-HkbIdrrwQ18e4gb8uolm3V5fk_kw1RDml66xhKnX_gw_F3_LRa6PHsuzH3viXl3fTzJ56kZHPFckovBQyCkHG4wJwhA60Z-ZdCihviGC84Da3S5947H-teXB-BsM1cvQLmpMDISHPkj_rIA9ry-kOtHNkFCH9sPfJg/w640-h360/figure1.JPG" width="640" /></a></div><br />Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-36278914182566201702023-01-08T17:55:00.003-08:002023-01-22T18:29:58.166-08:00系統三大基礎建設之二:震動處理<p>參考:</p><p><a href="https://bingrungtsai.blogspot.com/2021/11/blog-post.html">音響器材在使用時所面臨的震動來源及影響</a> </p><p><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%;"><br /></span></p><p><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%;">「減法邏輯」調聲的理念,非常關鍵的一部分,就是盡可能去消除任何會干擾訊號再生,引發失真的震動干擾。一個音響系統在播放時所面對的,並非只有表面上感覺得到的喇叭發聲產生的震動。還會受到許多細微,人的感官無法察覺的微小震動的影響。包括遠方傳來與建築物本身產生的極低頻率,這些無所不在,而且感受不出來的震動,對音質負面影響之程度,要等到將之去除了才會恍然大悟。而在音響市場上,針對震動處理而推出的產品不勝枚舉。在瞭解到其本質之後就會發現,絕大多數都規避了問題的核心,嚴格來說都只能算是調聲器具(</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%;">tuning devices<span lang="ZH-TW">)而已。我在</span>1990<span lang="ZH-TW">年代中期,在半信半疑的心態下,第一次嘗試用高科技震動處理,將二手購入的</span>Newport<span lang="ZH-TW">氣浮隔離平台,放在當時所用主要唱盤</span>Immedia RPM-2<span lang="ZH-TW">下面,所得到的音質改進程度令我大感震驚。那時才開始認知到,高科技震動處理器材與一般音響用的墊材,有著截然不同的性能差距。在生活重心回到台灣這幾年,透過各種管道也借來測試過,並且購入</span>Minus
K<span lang="ZH-TW">的高科技機械式避震平台,以及日本倉敷與德國</span>Accurion<span lang="ZH-TW">主動除震平台。這些器材原本設計是用在精密度極高的光學,半導體,及物理化學實驗等用途,它們的避震效果絕對不是隨便吹牛的,而是明明白白提供數據,顯示在何種狀況,處理哪些頻率的震動有多大效果。</span></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">在用這些高科技裝置嘗試與實驗的過程,我累積了不少經驗也得到不少新知識。例如放在上面的音響器材的本身性質,要考慮周到,並不是隨便任何器材放上去就必然得到最佳的音質效果。以黑膠唱盤來說,放在氣浮,高科技彈簧,或主動除震台時,首先要考慮到唱盤的懸吊避震機能,是否會造成妨礙或衝突。本身就有彈簧等軟式避震的唱盤,用在氣浮或</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Minus K<span lang="ZH-TW">平台,只要調整正確,經驗顯示可以有相輔相成的效果。但放在主動除震台,唱盤上的馬達唱臂等處傳來的震動,部分會被唱盤懸吊吸收或延遲,無法有效傳遞至平台表面。我所用的唱盤裡,</span>TechDas
Air Force III<span lang="ZH-TW">,</span>Technics SP-10R<span lang="ZH-TW">,</span>Immeida
RPM-2<span lang="ZH-TW">都屬於無懸吊的硬盤,放在主動除震台上可以明顯測量到,唱盤所產生的微小震動被抑制,音質隨之大幅提升。其中</span>SP<span lang="ZH-TW">─</span>10R<span lang="ZH-TW">本身沒有機座,直接將它放置於主動除震台,而所搭配使用的唱臂塔也是在除震台平面,所得的音質效果相當驚人。而像是</span>Technics
SL-1200G<span lang="ZH-TW">本身附有軟質避震腳,就改用可取代之並鎖在機座的硬質角錐。至於軟盤</span>Linn LP-12<span lang="ZH-TW">用在</span>Newport<span lang="ZH-TW">氣浮或</span>Minus K<span lang="ZH-TW">的效果很好,但目前我還未嘗試放在主動除震台上。根據二手消息來源的使用者回報,軟盤放在</span>Accurion<span lang="ZH-TW">主動除震台的效果似乎不是很顯著。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">此外器材與所置放的平台之間的介面(</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"> interface<span lang="ZH-TW">)也相當重要。使用不同的墊材,等於是在器材與平台間用了特性不同的震動濾波器,會影響到外界震動哪些頻率及比例會傳遞進到器材,以及相反方向,器材所產生震動會傳遞出來的效能。在思考採用哪一種墊材時,這些要件必然要列入考慮。許多人在這方面的思考方式是,聲音哪裡不對勁就換一種墊材試試看,直到覺得滿意為止。我的思考方式,則是在窮舉其它主要變因(像是喇叭擺位,音源的微調等)之後,再來用墊材作錦上添花的修飾,而且還要考慮到器材本身與下方平台的性質。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">我目前用了</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">3<span lang="ZH-TW">台主動除震台,除了給兩部主要參考唱盤使用之外,我還將其中一台專門給器材的獨立電源盒用,包括前級擴大機,唱放的電源部分等,放上去效果非常顯著。而最近更將幾台唱放的主機部分也放上主動除震台,唱盤旁邊的餘留空間,其音質的進步程度也令人驚訝。而且即使是低價位的唱放,也有脫胎換骨的音質升級效果。如果是放在主動除震台上,最主要的考量是如何讓器材產生的震動,最有效率最快速地傳遞給平台加以抵銷處理掉。這時就我會採用硬質的墊材像是腳錐或類似</span>Finite
Elemente<span lang="ZH-TW">的陶瓷腳,而且盡可能將它們鎖緊到器材上。例如圖</span>1<span lang="ZH-TW">,</span>2<span lang="ZH-TW">裡,都是用符合規格的螺絲,直接鎖在</span>Technics SP-10R<span lang="ZH-TW">與</span>
SL-1200G<span lang="ZH-TW">唱盤上。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">如果不是用主動除震台,主要的考量是在於加強</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">輔助隔離外來震動,或者吸收器材產生的震動且修飾聲音個性。軟質的材料像是</span>Sorbothane<span lang="ZH-TW">(高科技吸震材料)或是小型高科技彈簧腳(像是</span>Newport<span lang="ZH-TW">的</span>VIB<span lang="ZH-TW">系列),就可以扮演重要角色。例如</span>SP<span lang="ZH-TW">─</span>10R<span lang="ZH-TW">唱盤的獨立電源下方,就用了有點厚度的</span>Sorbothane<span lang="ZH-TW">,安置在重心所在圖</span>3<span lang="ZH-TW">,讓電源的機殼可以吸收各個軸向的震動。而後級擴大機下方,每台則用了</span>3<span lang="ZH-TW">個</span>VIB<span lang="ZH-TW">彈簧腳(圖</span>4<span lang="ZH-TW">),再放在</span>Newport<span lang="ZH-TW">氣浮平台上。使用高科技平台時,要注意負載的重量在工作範圍,這是基本常識。而像是</span>Sorbothane<span lang="ZH-TW">等科技墊材,也要注意它們的承重要在規格之內,不能太高或太低,才能發揮正常的效用。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">至於是否真有需要這麼講求避震除震,是許多人心中的疑問。有人甚至說,如果把「好的震動」也消除,聲音會「不好聽」。乍看之下好像有道理,但「好的震動」的定義是什麼?如果討論的是樂器,就是可以產生悅耳泛音效果的震動。而在音響器材的領域,若將之當成樂器來處理,就還有點道理。然而不同的人所認為的「好聽」並不見得相同,且會牽涉到種種的主觀因素。而從設計製造器材的角度來說,如果想排除「壞震動」留下「好震動」,除了靠聽覺來嘗試錯誤,並沒有實質可行的方式來達成。要選擇性地將某部分震動消除又留下其它部分,幾乎不可能辦到。另一方面,如果追求的是高傳真低失真,任何形式的震動,都會是造成失真的來源。至於把這些震動消除了,失真減低後,使否會得到「好聽」的結果,跟每個人主觀認定的好聽是如何有關。這屬於哲學的議題,我以前也幾次討論過,在此不再重複。在我的經驗裡,設計與製造的技術基礎越是紮實的器材,震動處理越好所得到的音質效益會越大。如果只是依賴設計者的耳朵弄出他</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">/<span lang="ZH-TW">她認為「好聽」的機器,或許就會被暴露出其原本的缺陷。</span><o:p></o:p></span></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjjGUC3iuirrF951x8oVtO1HEV6Tq9jXZhCfyShmWf-pr5uH1GUuNwnhA_7a4F7OD44Od6Zlf_qDKz9W0W4tMW_yZDNpL7sFPm_0AGEDAueqouQ4DgunR1p9ER2shfR8-l38MCLRl-_4lddqjWSd_bqUFw8I5NlVk2qKeN9oU1yJ0qsnHDnR225_9N-/s3264/figrue1.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjjGUC3iuirrF951x8oVtO1HEV6Tq9jXZhCfyShmWf-pr5uH1GUuNwnhA_7a4F7OD44Od6Zlf_qDKz9W0W4tMW_yZDNpL7sFPm_0AGEDAueqouQ4DgunR1p9ER2shfR8-l38MCLRl-_4lddqjWSd_bqUFw8I5NlVk2qKeN9oU1yJ0qsnHDnR225_9N-/s320/figrue1.JPG" width="320" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgxg-ta_iMDw8omqYFiqTct-Vf80RRrjaHpb-7aLp59l-XXsqimrXT7di9ANas2xU6H_9OjEBdgfl5cZ5SNEmmwRxxz2PD98PYNPMuOmQZbEQGwgy8T0H2aUUaSDbU2torDfbE8twz6GUBvQn_PysGlvsYh14krs9Z_TbrBrksTq834AcOIEVEsfAgS/s3264/figure2.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgxg-ta_iMDw8omqYFiqTct-Vf80RRrjaHpb-7aLp59l-XXsqimrXT7di9ANas2xU6H_9OjEBdgfl5cZ5SNEmmwRxxz2PD98PYNPMuOmQZbEQGwgy8T0H2aUUaSDbU2torDfbE8twz6GUBvQn_PysGlvsYh14krs9Z_TbrBrksTq834AcOIEVEsfAgS/s320/figure2.JPG" width="320" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgt4xqenly9d31F5cdb0EjlUOlsgdfNdcTcOG_nloASMy5DGm7XcfjEGLNHlHm1koKS1TbVX9f9jIHumJUJTR1bfqI_apfjoSPI0XS9uUI1aDD6DBVTQxiB8H1zqoFo2ydtATmdyMVGjrRmboS6DOwG2r50NtOaeffSofl6oKyYQb6cZZM5QkXWPsjl/s3264/figure3.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgt4xqenly9d31F5cdb0EjlUOlsgdfNdcTcOG_nloASMy5DGm7XcfjEGLNHlHm1koKS1TbVX9f9jIHumJUJTR1bfqI_apfjoSPI0XS9uUI1aDD6DBVTQxiB8H1zqoFo2ydtATmdyMVGjrRmboS6DOwG2r50NtOaeffSofl6oKyYQb6cZZM5QkXWPsjl/s320/figure3.JPG" width="320" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEikD0uK9XbtthMEkt9CK4CPtSOJJivvbMdqTL1Gd_lak_0dcgoWv1uQSE2emGrs90qZaE09HG70SqTcbQ4jjU4285fjm8nwwUQJdUE0g73-sdwFMArVrOx3MsieA9HW3sUjdXpFiWsMzJb0gI7C_fKXAo1-fSGFAPv3CGqvFa5mN_KexyUL8pIrGOGX/s3264/figure4.JPG" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="2448" data-original-width="3264" height="240" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEikD0uK9XbtthMEkt9CK4CPtSOJJivvbMdqTL1Gd_lak_0dcgoWv1uQSE2emGrs90qZaE09HG70SqTcbQ4jjU4285fjm8nwwUQJdUE0g73-sdwFMArVrOx3MsieA9HW3sUjdXpFiWsMzJb0gI7C_fKXAo1-fSGFAPv3CGqvFa5mN_KexyUL8pIrGOGX/s320/figure4.JPG" width="320" /></a></div><br /><span lang="ZH-TW"><br /></span><p></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-77356473787459836392023-01-08T17:51:00.000-08:002023-01-08T17:51:04.190-08:00器材「升級」的意義<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">多數音響玩家會持續追尋</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">/<span lang="ZH-TW">膜拜高價器材,一直所希望的就是能有更多預算來「升級」。等到對各種器材的工作原理及設計製造程序有了比較深入的理解,才會真正認知高價與平價器材(包括線材墊材等)之間的實質差異,在摒除了品牌與價格的心理催眠作用,且於嚴格控制變因的情況下作客觀比較,實際上在音質方面並不容易判定勝負。換了比較高價的東西,聲音當然會不同,心理上會特別去注意比原來進步的地方。或者由於音色不同,而有了將原來問題解決的錯覺,甚至有些方面其實是退步了也沒有立刻察覺。直到過了一陣子後,對聲音又開始不滿意,於是又想要再次「升級」。換言之,用的器材價格升級,多數情況得到的只是不一樣的聲音。剛開始由於安慰劑效應,好像聽起來比較好。但客觀來看,若沒有去處理對付現有的核心問題所在,聲音方面並不會真正升級。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">買了可用來自我陶醉或大肆炫耀的高價器材,卻不願意充實基本知識,例如喇叭與空間的互動關係,或投資於外觀不起眼的系統「基礎建設」像是電源與震動的正確處理,使得系統的頻率響應,動態,暫態與安靜度等方面大打折扣而不自知。換句話說,大多數人都以滿足心理上擁有高級品的欲望與視覺的需求為優先,對實質會改進音質的作為與器材卻興趣缺缺。我自己當然也經歷過這個階段,到了</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">10<span lang="ZH-TW">多年前才逐漸脫離,並進化到可以看穿各種噱頭,認清器材與聲音本質的階段。</span><o:p></o:p></span></p>
<p class="MsoNormal"><br /></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-58840919165941773872023-01-08T17:39:00.007-08:002023-01-20T19:50:30.874-08:00系統三大基礎建設之三:喇叭擺位之低頻響應<p> <span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%;">我在音響論壇</span><span face="新細明體" style="color: #333333; font-size: 12pt;">390</span><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">期專欄文裡</span><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">強調的重要基本概念之一,就是</span><span face="新細明體" style="color: #333333; font-size: 12pt;">Schroeder Frequency</span><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">的觀念:</span></p><p><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;"><a href="https://bingrungtsai.blogspot.com/2022/10/schroeder-frequency.html">https://bingrungtsai.blogspot.com/2022/10/schroeder-frequency.html</a><br /></span></p><p><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">低頻聲波的波長動輒在幾公尺以上,跟中高頻以公分計算的波長,與空間的交互作用截然不同。這意味的是聆聽空間裡的中高頻與低頻的問題,必然要分開討論</span><span face="新細明體" style="color: #333333; font-size: 12pt;">/</span><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">處理。而且因為處理低頻的問題難度較高,且因人腦的作用會連帶影響到高低頻的聽感,所以要列為優先處理標的。中高頻的問題相對單純且較容易處理,順序可以在後。</span></p><p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">於空間裡</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">300Hz<span lang="ZH-TW">以下低頻響應有大幅度凹凸,不但是嚴重的失真,所影響到的更遠超過單純低頻的聽感,連帶對中高頻的感知也會隨之改變,這是人腦天生的反應,學理上是</span>psychoacoustics<span lang="ZH-TW">現象的一種。在音響展時,絕大多數的展出房間,聽起來就只是在播放聲音,不能吸引人到音樂之中。主要就是由於低頻響應的問題,連帶使中頻聽起來不夠紮實而顯得瘦弱,而高頻也許不刺耳但與感覺與較低頻域銜接不良。這樣一來,聽感上就會像是幾個不同單體在發出聲音,各頻段之間缺乏協調性,讓人無法長久聆聽。根據我個人“整治”自己現有超過</span>8<span lang="ZH-TW">對喇叭(包括</span>3<span lang="ZH-TW">對靜電喇叭)的經驗,所謂的聲音太冷,太瘦,低頻鬆散或欠缺速度感,絕大多數都是這頻段出了問題,影響到人腦對其他頻段的主觀印象。而偏偏在這頻段的音波很長(</span>300Hz<span lang="ZH-TW">波長已經超過</span>1<span lang="ZH-TW">公尺,越低的頻率更長),擴散或吸音材料都起不了甚麼作用。</span><o:p></o:p></span></p><p><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;"></span></p><p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">同樣的問題也常在多數發燒友家中出現,然而大部分人卻不能理解,也不去追尋處理問題的根本所在,只想靠換器材線材來獲得想要的聲音。更換器材時,如果新的喇叭與房間的交互作用,剛好完全避開了原來的問題頻率,那就可喜可賀。但這樣的機率非常低,因為所有喇叭的低頻工作模式差異不大。多數情況只是發生問題的頻率稍有更動,短時間聽起來不一樣,過了一陣子,又開始會覺得不滿意。至於想靠換擴大機,墊材或線材等來處理頻響凹凸的問題,那更是緣木求魚,因為改變的頂多是泛音分佈不同所造成的音色差異。有人說用擺設幾塊吸音或擴散板可以解決低頻問題,也是因為改變了一些中高頻響應,從</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 18.4px; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">psychoacoustics<span lang="ZH-TW">效應引發的感官錯覺,好像是改變了低頻響應,事實上卻並沒有。這種物理上不可能的事情,會信誓旦旦說聽起來真的有效,也是</span>wishful thinking<span lang="ZH-TW">在作祟,缺乏基礎科學知識的理性制約所造成。</span></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">在一般大小的空間裡,用測量儀器觀察數據就可以知道,喇叭與聆聽處的相對位置稍微改變,低頻響應的變化就很可觀,因此單靠人力來找出最佳位置會非常困難。比較可靠的方式,是藉著工具來輔助。不過測量工具本身並不能指引移動的方向,而且要一直推著喇叭到處探索,不太實際。最好的方式,是利用模擬空間響應的電腦軟體,先找出大致上較佳的喇叭位置來指引,會容易得多。古早以前,美國</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">RPG<span lang="ZH-TW">公司有出過</span>100<span lang="ZH-TW">美元的軟體,模擬方形房間的擺位,自動會找出低頻響應的最佳位置。當時我在幾個空間用過,效果相當好。但是軟體沒有更新,後來新的電腦都無法使用。德國</span>Elac<span lang="ZH-TW">也曾出過</span>CARA<span lang="ZH-TW">模擬軟體,可以模擬任何形狀的房型,但使用起來太過複雜。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">目前免費下載軟體</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">REW<span lang="ZH-TW">裡的模擬功能,原本是給輔助低音擺設用的,但用來做喇叭低頻單體的模擬也相當好用。只要房間大致接近立方形狀,按照模擬的結果去擺位,都可以得到相當好的實際低頻響應。除了雙面發聲</span>dipole<span lang="ZH-TW">模式的喇叭,例如</span>Quad<span lang="ZH-TW">,</span>Sound Lab<span lang="ZH-TW">的靜電式,或</span>Magneplanar<span lang="ZH-TW">平面式,還沒找到方法模擬,一般採用傳統低音單體的喇叭,只要量出單體距離地面的精確距離,都可以計算出良好的結果。如圖</span>1<span lang="ZH-TW">所示,這是</span>REW<span lang="ZH-TW">的</span>Room Simulation<span lang="ZH-TW">功能。在左上方將房間的長寬高數值輸入,右下角填入低頻─</span>3dB<span lang="ZH-TW">頻率,再到左下角的空間示意圖將低頻單體的高度與聆聽位置設定後,這時就可藉著移動單體的位置,看到右上方低頻響應的變化。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">由於兩聲道喇叭在模擬圖裡移動時完全獨立,無法自動維持對稱。所以比較容易的辦法,是只模擬一個聲道,得到最佳結果後,實際擺設時另一聲道就用對稱於房間中軸的位置。圖</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">1<span lang="ZH-TW">與</span>2<span lang="ZH-TW">是用這個簡化方式的模擬結果,圖</span>1<span lang="ZH-TW">顯然是較平順的響應。得到不錯的模擬結果後,接下來就要以工具輔助,將喇叭位置移動到與模擬結果最接近的位置。我是靠木工泥工常在使用的雷射測距儀,水平標線儀等工具使低音單體的中心點,精確地移至模擬出來的結果。按照這數據去精確擺設左聲道喇叭,再將右聲道喇叭擺置在對稱於中心軸線的位置。很少例外,絕大多數情況,實際聆聽驗證低頻響應都相當平直,沒有明顯的突出或凹陷。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">不過即使用電腦輔助找到了最佳的喇叭擺位與聆聽位置,也只有在該聆聽位置上是最好的響應。除非打算只在該處聆聽,若不去處理</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">390<span lang="ZH-TW">期裡我說的鏡像音源,也就是一般所說的房間駐波所引發的問題,在其它位置可能還是存在嚴重的低頻響應凹凸。例如圖</span>3<span lang="ZH-TW">與圖</span>4<span lang="ZH-TW">裡,代表聆聽位置的人頭只要稍微向左移動一些,</span>30Hz<span lang="ZH-TW">以下的低頻響應就有明顯的改變。換句話說,如果只靠喇叭擺位,在一般不大的空間裡,能獲得最平直低頻響應的</span>sweet spot<span lang="ZH-TW">會相當小。如果想讓</span>sweet spot<span lang="ZH-TW">變大一些,就要想法去減低來自鏡像音源的干擾,而在房間裡會形成鏡像音源的主要地點要做一些處理。例如喇叭後方,也就是面對聆聽位置的房間前方兩個角落,正確擺設體積夠大的低頻陷阱,就是一個開始。這兩處鏡像音源與喇叭的本體音源,兩者發出的聲波,在聆聽處最容易產生加強減弱的干涉效應。把這兩個影響最大的鏡像音源予以削弱,低頻響應較接近平直的</span>sweet
spot<span lang="ZH-TW">就可以增大許多。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">至於非立方形或非對稱形狀的空間,在某些範圍之內運用一些技巧,</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">REW<span lang="ZH-TW">的模擬功能還是可以得到近似的結果。如果與立方形差別太大無法處理,就要用測量的方式來觀察實際低頻響應。這牽涉到要如何擺設麥克風,詮釋驗證數據,而且要移動喇叭與</span>/<span lang="ZH-TW">或麥克風位置,來找出最佳點。詳細的方法程序,以後我會另文描述介紹。</span><o:p></o:p></span></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"></span></p><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh1Vs5yXggcrxwRUWcskxlFUFehxpxM_fWe0D4CiFgmRBdBvUFjFaz1smGaBJsTxxlPg1ola25rD4EOYQWU3CUwsmftM0fUDRan2TF8OefcaDtgy2P4UXPX6sxXUXPqFRx3nJh9O_kWQ2TA4PyfN5BIPTvxukcINbeS7vUpeXh25JEbOL2hK3yBywVU/s1702/figure1.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1222" data-original-width="1702" height="460" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEh1Vs5yXggcrxwRUWcskxlFUFehxpxM_fWe0D4CiFgmRBdBvUFjFaz1smGaBJsTxxlPg1ola25rD4EOYQWU3CUwsmftM0fUDRan2TF8OefcaDtgy2P4UXPX6sxXUXPqFRx3nJh9O_kWQ2TA4PyfN5BIPTvxukcINbeS7vUpeXh25JEbOL2hK3yBywVU/w640-h460/figure1.jpg" width="640" /></a></div><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEic5vczy89SZU1zPZ-NMCXTXhtzaM53JeOuDagkWOaboNpK8tkr0B-ZICzrxuXTx2T6-Fp45RvOiPCzXf5U8tu2Oczw9sfTyMno1jEZ9aWAt3_tgrWeiAMmCfxow2bZ7yvKy4wFxC90M3vcO4fugjB8rPzDFhyqmzv57OmIjAOVFQkflnMV0LgHWu5h/s1702/figure2.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1222" data-original-width="1702" height="461" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEic5vczy89SZU1zPZ-NMCXTXhtzaM53JeOuDagkWOaboNpK8tkr0B-ZICzrxuXTx2T6-Fp45RvOiPCzXf5U8tu2Oczw9sfTyMno1jEZ9aWAt3_tgrWeiAMmCfxow2bZ7yvKy4wFxC90M3vcO4fugjB8rPzDFhyqmzv57OmIjAOVFQkflnMV0LgHWu5h/w640-h461/figure2.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi_xCjoq6A6ieI4UPYI5QTnqxiN-Sl6PRW8VImAk3OomiJushJq6GX7npKT6Y0QtIejs-Q62Aa5K1IL1OPgh_zx5YzNTnDXyPfQFBrArivibS_FNzrbwgzz1jv5x-yfE7uCr8ddMK2DapBwo95fmu07emlcNUgbe4Qty5d3z3Bu32HFSFoaY4fa89b0/s1702/figure3.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1222" data-original-width="1702" height="460" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEi_xCjoq6A6ieI4UPYI5QTnqxiN-Sl6PRW8VImAk3OomiJushJq6GX7npKT6Y0QtIejs-Q62Aa5K1IL1OPgh_zx5YzNTnDXyPfQFBrArivibS_FNzrbwgzz1jv5x-yfE7uCr8ddMK2DapBwo95fmu07emlcNUgbe4Qty5d3z3Bu32HFSFoaY4fa89b0/w640-h460/figure3.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><a href="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEim6Yr3lpknSjrShUOu4azTCBb9wL-zs5jKWX3I8nB7TOZeLucYIf8RWyUzef53lw6sXxRVxgs1YwxUqU662TgfzI8NlBXd4VS5ixGY4xdAX5UI5sMfvWATp1po4ztSkKtSqeWG-LYvbFXsssVa1WBcoInYzaHLhjg5LzB4Cga3HEBeI_YS4f-GiEwp/s1702/figure4.jpg" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1222" data-original-width="1702" height="460" src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEim6Yr3lpknSjrShUOu4azTCBb9wL-zs5jKWX3I8nB7TOZeLucYIf8RWyUzef53lw6sXxRVxgs1YwxUqU662TgfzI8NlBXd4VS5ixGY4xdAX5UI5sMfvWATp1po4ztSkKtSqeWG-LYvbFXsssVa1WBcoInYzaHLhjg5LzB4Cga3HEBeI_YS4f-GiEwp/w640-h460/figure4.jpg" width="640" /></a></div><br /><div class="separator" style="clear: both; text-align: center;"><br /></div><br /><span lang="ZH-TW"><br /></span><p></p><p class="MsoNormal"><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><span lang="ZH-TW"><br /></span></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-40400442509655746322023-01-05T00:26:00.000-08:002023-01-05T00:26:14.925-08:00「高傳真」與「好聽」之辯<p> <span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">大多數的音響玩家,觀念裡總認為一個器材或套音響系統,高傳真與好聽是相抵觸的目標,把解析度好而不夠悅耳的情況以「太</span><span style="color: #333333; font-family: 新細明體; font-size: 12pt; line-height: 115%;">Hi Fi<span lang="ZH-TW">」來形容 。在我自己音響歷程</span>40<span lang="ZH-TW">多年裡,早期的概念也是如此。但隨著對器材,系統與現場聆聽經驗的累積想法逐漸改變。我現在認為高傳真與好聽,其實在絕大多數情況完全不衝突,甚至是密不可分的關係。</span></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">要能接受這個觀念,首先必須有足夠的現場經驗,對不經任何電子線路失真污染過的樂器人聲等,要有一個基本的認知及熟悉之程度。否則,如果老是以系統播出的音質為參考基準,將被製成「罐頭」的音樂軟體內容,且過混音等化的「好聽」當成標竿,那就沒有什麼值得討論的餘地。這樣思維的人士,就常會說出自己系統比現場「更好聽」的論述。以前我就曾經在此討論過,這就像是拿罐頭與原始食材的味道來作比較,也許在一些情況是真的比較「好吃」,但不能說所有罐頭都比所有的新鮮食材好吃。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">由於錄音的過程,等於已經將生鮮食材製成罐頭,因此重現現場乃是不可能。追求高傳真的終極目的,應該是將錄音內容不增不減地呈現出來。而將錄音媒體裡的資訊,接近完整無失真地表現出來,真的會不好聽的機會其實非常小。在我的經驗裡,本來以為「難聽」或「不好」的錄音,在系統音質進步到一定程度之後,往往就出現之前未察覺的細節與正常音色,變得相當悅耳好聽。極少部分的例外,才真的是難以入耳的。</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;"><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">但什麼樣子的系統聲音走向,才是往高傳真的方向前進?基本概念就是捨棄一般的「加法」思維,不要老想去用各種方式去添加音質元素。而以「減法」邏輯為出發點,降低任何影響聽感的失真,並且設法排除呈現錄音內容的所有障礙。至於哪些是屬於影響聽感的失真,該如何去辨認?當聽到系統有缺點時,不要馬上怪罪到器材上頭,需要去思考探究的方向為:這是由哪一種失真所造成,然後有哪些方法可以去排除。多聽「不插電」現場演出的目的之一,即是培養出辨別這類失真的能力。尤其是許多「好聽」的失真(</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">euphonic distortions<span lang="ZH-TW">),很容易讓人以為這是該有的聲音。最常見的例子,小提琴的音色,多數人追求的就是甜美的木質感,不論強弱音皆是如此。事實上在現場聆聽,小提琴在弱音,尤其是</span>muted<span lang="ZH-TW">的狀態時,音色的確非常甜美迷人。但是在強奏時,雖然不會刺耳,其爆發穿透力是相當驚人而震撼的。而這種強音段落,對音響系統播放水準的要求也最嚴苛。眾多的音響玩家,包括年輕時的我,在聽到系統播放小提琴強音時有扎耳感時,就想法要藉著各種調整與換器材線材的方法,去弄成不刺耳的呈現。其副作用是系統的動態與暫態表達能力,受到壓抑而缺乏音樂該有的活力。我現在的作法,是去探討播放的環節裡,有哪些是失真的來源,才會造成這刺耳的聽感。經過多年的研究探討,我認為最常見的,就是黑膠播放系統的調整不夠到位,以及喇叭擺位不夠精確所造成的失真。黑膠播放器材調整不當,最容易出現的音質問題之一,就是歌聲的齒擦音(</span>sibling<span lang="ZH-TW">)及弦樂器強音的摩擦感粗糙且特別突出,這是在音源前端產生的失真。而喇叭擺位不佳,造成左右喇叭發出的聲波,尤其是高頻訊號到達聆聽位置時有時間差,也是在許多系統造成這種不細緻,刮耳失真的常見現象。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">至於空間裡</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">300Hz<span lang="ZH-TW">以下低頻響應有大幅度凹凸,不但是嚴重的失真,所影響到的更遠超過單純低頻的聽感,連帶對中高頻的感知也會隨之改變,這是人腦天生的反應,學理上是</span>psychoacoustics<span lang="ZH-TW">現象的一種。在音響展時,絕大多數的展出房間,聽起來就只是在播放聲音,不能吸引人到音樂之中。主要就是由於低頻響應的問題,連帶使中頻聽起來不夠紮實而顯得瘦弱,而高頻也許不刺耳但與感覺與較低頻域銜接不良。這樣一來,聽感上就會像是幾個不同單體在發出聲音,各頻段之間缺乏協調性,讓人無法長久聆聽。根據我個人“整治”自己現有超過</span>8<span lang="ZH-TW">對喇叭(包括</span>3<span lang="ZH-TW">對靜電喇叭)的經驗,所謂的聲音太冷,太瘦,低頻鬆散或欠缺速度感,絕大多數都是這頻段出了問題,影響到人腦對其他頻段的主觀印象。而偏偏在這頻段的音波很長(</span>300Hz<span lang="ZH-TW">波長已經超過</span>1<span lang="ZH-TW">公尺,越低的頻率更長),擴散或吸音材料都起不了甚麼作用。</span><o:p></o:p></span></p>
<p class="MsoNormal"><span lang="ZH-TW" style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">同樣的問題也常在多數發燒友家中出現,然而大部分人卻不能理解,也不去追尋處理問題的根本所在,只想靠換器材線材來獲得想要的聲音。更換器材時,如果新的喇叭與房間的交互作用,剛好完全避開了原來的問題頻率,那就可喜可賀。但這樣的機率非常低,因為所有喇叭的低頻工作模式差異不大。多數情況只是發生問題的頻率稍有更動,短時間聽起來不一樣,過了一陣子,又開始會覺得不滿意。至於想靠換擴大機,墊材或線材等來處理頻響凹凸的問題,那更是緣木求魚,因為改變的頂多是泛音分佈不同所造成的音色差異。有人說用擺設幾塊吸音或擴散板可以解決低頻問題,也是因為改變了一些中高頻響應,從</span><span style="color: #333333; font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">psychoacoustics<span lang="ZH-TW">效應引發的感官錯覺,好像是改變了低頻響應,事實上卻並沒有。這種物理上不可能的事情,會信誓旦旦說聽起來真的有效,也是</span>wishful
thinking<span lang="ZH-TW">在作祟,缺乏基礎科學知識的理性制約所造成。</span><o:p></o:p></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-59623851022329468172022-12-15T17:37:00.001-08:002022-12-15T17:40:15.567-08:00影響唱盤音質的要素之三:轉盤驅動方式與扭力<p> <span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt; line-height: 115%;">因為唱頭是被動元件,在唱盤不轉動的靜止狀態時,由於沒有外來能量來源,本身無法發出訊號。唱盤轉動,提供恆定之能量,使針尖遵循溝槽訊號振動,帶動針桿及發電機構,才能產生訊號。以能量供應模式來看,唱盤角色類似於後級擴大機。它要提供穩定的直流能量,再讓訊號加諸其上(</span><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%;">modulate<span lang="ZH-TW">),傳送至下游器材。因此直流能量之純淨度,會直接影響訊號品質。</span></span></p><p><span face="新細明體" style="color: #333333; font-size: 12pt; line-height: 115%;"><span lang="ZH-TW">除了之前已經提到,</span></span><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">轉盤的轉速要準確及穩定之</span><span face="新細明體" lang="ZH-TW" style="color: #333333; font-size: 12pt;">外,</span><span face="新細明體" style="color: #333333; font-size: 12pt;">另外還要考慮的是,基於能量不滅定律,唱頭與溝槽接觸摩擦的發電過程,會造成能量損耗,唱盤的轉盤必須補充並維持能量,才能保持轉速平穩。這也是不同驅動方式與扭力高低的唱盤,會造成音質不同的原因之一。</span></p><p><span face="新細明體" style="color: #333333; font-size: 12pt;">以驅動方式來說,直接驅動與惰輪驅動的扭力高,但馬達的震動容易傳遞至唱片表面而影響唱頭,而馬達距離播放時的唱頭近,也可能會有磁性的不良作用。皮帶傳動在製作上較容易,所以市面上多數唱盤是以皮帶傳動。皮帶本身有部分隔離震動的效果,但是皮帶的厚薄均勻度,彈性高低,都不容易控管,對轉速穩定度不利。而且帶動皮帶的馬達pulley,以及轉盤與皮帶接觸處的加工精密度和真圓度也會直接對轉速穩定造成影響。至於多馬達多皮帶,許多時候會引發更多的問題,之前就已經討論過。請參考:</span><a href="https://bingrungtsai.blogspot.com/2022/09/blog-post_15.html" style="font-size: 12pt;">https://bingrungtsai.blogspot.com/2022/09/blog-post_15.html</a></p><p><span style="color: #333333; font-size: 12pt;">扭力高低與音質的關係,也屬於一種工程的妥協。扭力高,音質一般會比較有活力,爆發力強,但來自馬達的震動就會較大。扭力低,馬達震動小,音質傾向較輕鬆,但能量感暫態反應通常較差。</span></p><p><br /></p><p><br /></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-27208616278486349902022-11-08T23:32:00.003-08:002022-12-18T17:22:19.071-08:00直驅唱盤的漏磁<p> <span style="font-family: arial;">直驅盤與用皮帶或其它方式傳動的唱盤,音質個性聽起來有明顯的差異,許多人應該都有經驗。追究其原因,多數人會說是因為扭力大小,震動傳遞,或者是馬達控速方式等不同所造成。其實馬達磁性對唱頭的影響,也要考慮進去。直驅馬達本身相當大的磁性材料,位於播放時的唱頭下方,對低輸出MC唱頭所造成的負面影響,很可能是主要原因之一。根據物理定律,磁力是無法隔絕的,只能引導其方向。因此要避免磁力的影響,除了加大距離之外,並不容易。</span></p><p><span face="Segoe UI Historic, Segoe UI, Helvetica, Arial, sans-serif" style="color: #050505;"><span style="font-family: arial;">磁漏所造成的影響,以後會另外深入討論。目前觀察到的,是測量起來IMD失真會偏高,怎麼調VTA/SRA都沒用。音質上則會有霧氣感,樂器質感不細膩,且整體缺乏流動活生感。受影響最大的唱頭,多數是歐洲品牌,我有實際經驗的包括ORTOFON A95及ANNA DIAMOND,EMT,BENZ MICRO,vdH等。日本唱頭,可能在設計測試時,就已經用直驅盤為參考之一,所以受到負面影響比較少。</span></span></p><p><span style="font-family: arial;"><span face="Segoe UI Historic, Segoe UI, Helvetica, Arial, sans-serif" style="color: #050505;"><span>新一代的Technics直驅馬達,由於少了周圍環繞的靜子(stator)磁鐵,這方面問題比較少,但感覺還是有些影響。我自己的SP─10R與SL─1200G都盡量與日本唱頭搭配,目前歐洲頭則只用</span></span><span style="color: #050505;">ORTOFON </span><span style="color: #050505;">SPU及DECCA的MM唱頭。</span></span></p><p><span style="color: #050505; font-family: arial;">現今世界最貴的唱盤之一,SAT,是拿SP─10R去改的。他把轉盤表面加厚一吋左右,目的之一就是要把磁漏的因素降至更低。</span></p><p><span style="color: #050505; font-family: arial;">以下這篇文章關於直驅盤的優劣分析,值得參考:</span></p><p><span style="color: #050505; font-family: arial;"><a href="http://korfaudio.com/blog95?fbclid=IwAR3mOsTzqVvKXV0MSI4UCX28gwLiYxE6eUhLbfhj0f5qdxnRONQGyP6TqT8">http://korfaudio.com/blog95?fbclid=IwAR3mOsTzqVvKXV0MSI4UCX28gwLiYxE6eUhLbfhj0f5qdxnRONQGyP6TqT8</a></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.comtag:blogger.com,1999:blog-1765635753839886196.post-40154361163985268382022-11-06T18:06:00.001-08:002022-11-06T18:06:41.804-08:00Shizuka Cable Wrap <p> <span style="font-family: 新細明體; font-size: 12pt;">Shizuka
is a cable wrap from Kiso Acoustics, Japan, a company also responsible for the
highly acclaimed "big sounding" miniature speakers, HB-1. These black
colored wraps are said to contain CMC (Carbon Micro Coil), a high-tech material
with numerous tiny coils turning incoming electro-magnetic waves into heat,
hence reducing interference to the transmitted signal.</span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">Adding
three pairs of Shizuka to my system resulted in a much quieter, darker
background and other more fundamental transformations. The effect was as if a
thin veil has been lifted from the sonic picture, with richer tonal colors,
crisper delineation of images, as well as improved visibility into the deepest
corners of the sound stage. Most importantly, with the wraps in place, listening
to records became more akin to witnessing a musical event, rather than
auditioning an audio system. I often found myself finish listening to the whole
side of a record without realizing it. In other words, they helped me move a
major step toward my ultimate goal, i.e., a sonic nirvana where the system produces
music completely free of grain or electronic glare.<o:p></o:p></span></p>
<p class="MsoNormal"><span style="font-family: 新細明體; font-size: 12.0pt; line-height: 115%; mso-ascii-theme-font: minor-fareast; mso-fareast-font-family: 新細明體; mso-fareast-theme-font: minor-fareast; mso-hansi-theme-font: minor-fareast;">They
are magical, addictive stuff, indeed. Highly recommended!<o:p></o:p></span></p>Bing R. Tsaihttp://www.blogger.com/profile/17606591731297716293noreply@blogger.com